AS-Interface Safety at Work - SCHMERSAL - #12

Text version of the page

12 AS-Interface Safety at Work R C S OR BNS 260 AS 26 6 2000 13 4 36 19 22 ¤ 4,5 LED • Safety sensor • Integrated AS-Interface interface • AS-Interface LED • Available with M12 plug-in connector and pre-wired cable • Thermoplastic enclosure • Coded actuator • Long life, no mechanical wear • Insensitive to transverse misalignment • Concealed mounting possible • Insensitive to soiling • Protection class IP 67 Approvals F Ordering details Technical data Standards: EN 50295, IEC 60947-5-3, EN ISO 13849-1, IEC 61508 Enclosure: glass-fibre reinforced thermoplastic AS-Interface connection type: cable LSYY (black) Cable section: 2 x 0.24 mm2 Protection class: IP 67 AS-Interface operating voltage: 26.5 ... 31.6 VDC, via AS-Interface, reverse-polarity proof AS-Interface operating current: £ 50 mA AS-Interface specification: (V 2.1) Profile: S-0.B IO-Code: 0x0 ID-Code: 0xB ID-Code1: 0xF ID-Code2: 0xE AS-I inputs: contact 1: data bits D0 /D1 = static code 00 or dynamic code transmission contact 2: data bits D2 /D3 = static code 00 or dynamic code transmission Parameter bits: P0 … P3 not used Input module address: Default on address 0, programmable via the AS-Interface Master or Hand-held programming device Indications: AS-Interface: voltage LED green, communication LED orange Mode of operation: magnetic Sao: 5 mm Sar: 15 mm Repeat accuracy: R £ 0,1 Sao Switching frequency f: < 1 Hz Actuating magnet: BPS 260, coded EMC rating: conforming to EMC Directive Ambient temperature: – 25 °C … + 60 ºC Storage and transport temperature: – 25 °C … + 70 ºC Classification: Standards: EN ISO 13849-1; IEC 61508; IEC 60947-5-3 PL: up to e Category: up to 4 PFH value: 6,21 x 10-9 /h for max. 500.000 operations/year SIL: up to 3 Service life: 20 years Classification: PDF-M Note Ordering details Actuating magnets Standard BPS 260-1 Mounting angle of 90° BPS 260-2 Spacer Distanzstück BNS 260 The actuators for the magnetic safety sensors must be ordered separately. The addressing must take place via the cable end or the M12 connector. 1: AS-Interface + 2: spare 3: AS-Interface – 4: spare 1 4 2 3 C BNS 260À-AS-Á No. Option Description À 2 m cable STG 2 m cable with straight plug M12 STW 2 m cable with angled plug M12 Á L Left hand door R Right hand door System components 5 22 19 ¤ 4,5 36 26 13 6 36 26 19 22 ¤4,5 Actuating magnets BPS 260-1/-2 Spacer BNS 260 Left hand door Right hand door 3,5 3,5 3,5 3,5 3,5 3 3 4 5 2 1 0 5 5 5 4 3 2 3,5 3,5 3,5 3,5 3,5 3 3 4 5 2 1 0 5 5 5 4 3 2 BPS 260-1 BPS 260-2 Switch on/off diagram