AS-Interface Safety at Work - SCHMERSAL - #11

Text version of the page

11 R C S OR AS-Interface Safety at Work ASM G2 Approvals F * Ordering details Technical data Standards: EN 50295, EN ISO 13849-1, IEC 61508 Response time: < 40 ms Switch-on time: < 10 s AS-i specification: profile: S-7.5.5 Enclosure: stainless steel Dimensions (L/W/H): 120 x 85 x 96 mm Weight: approx. 800 g Mounting: onto standard DIN rails Screw terminals: max. 2 x 1.5 mm2 Electrical data: AS-i operating voltage: 26.5 ... 31.6 VDC Power consumption from AS-i: approx. 250 mA or external supply Operating voltage: 24 VDC ± 15 % Power consumption 24 VDC: approx. 200 mA Power consumption from AS-i: approx. 50 mA Insulation voltage: ³ 500 V Inputs: 4 inputs, supplied from AS-i, as EDM or start inputs Outputs: each time 2 output switching elements, for enabling paths 1 and 2 Contact load capacity: 3 A DC-13 at 30 V 3 A AC-15 at 30 V Diagnostic indications: LCD AS-i status and error indications LED green Power LED green/red U AS-i / Fault LED yellow Ready LED green Channel 1 LED green Channel 2 Ambient conditions: Operating temperature: 0 °C … + 55 ºC Storage and transport temperature: – 25 °C … + 85 °C Protection class: IP 20 to IEC/EN 60529 Resistance to vibrations: to EN 61131-2 Resistance to shocks: to EN 61131-2 Classification: Standards: EN ISO 13849-1; IEC 61508 PL: up to e Category: up to 4 PFH value: 5,4 x 10-9 /h SIL: up to 3 Service life: 20 years Note For the configuration with the asimon software, a PC or laptop is required. Hardware requirements: • A Pentium® Intel® processor or faster (e.g. compatible models, e.g. AMD® or Cyrix®) • A CD-ROM player • At least 32 MB RAM and 32 MB HDD • A free RS 232 (serial) interface with 9-pole SubD-connector (Using a USB-RS 232 interface convertor or a serial interface card could cause communication problems with the safety monitor) Operating system: • Microsoft® Windows 2000 / XP / Vista® Ordering details Configuration cable ASM G2-CC with PS2 connector and SUBD 9 connector, Length: 1.8 meter asimon G2 software package ASM G2-CD Configuration and diagnostic software version 3.x with documentation on CD-ROM C Safety monitor ASM G2-R2/R2 for 2 AS-i circuits and for up to 16 enabling paths * Note: UL/CSA: Class 2 power-supply only System components Configuration cable ASM G2-CC Configuration software asimon G2 V 3.x Software asimon G2 for the configuration, commissioning and diagnostics of the AS-Interface ASM G2 safety monitor • Safety monitor for 2 AS-i circuits • Monitoring of up to 62 safe AS-i slaves, e.g.: safety switches, solenoid interlocks, emergency stop devices, two-hand controls, light curtains and light grids, etc. • 256 function blocks (devices) possible • Control of up to 16 redundant enabling paths, 2 internally in the device and up to 14 external safe AS-i outputs • Mains coupling of 2 AS-i circuits • LCD diagnostic display with 4 buttons • Configurable monitoring modules for different safety switchgear • Filter functions for bouncing safety guards • Integrated muting module • Other functions: AND-operations, OR-operations, start modules, on-site reset, start-up test, stop categories 0 & 1 • START inputs: start functions through external button • EDM inputs: connection of feedback circuits to monitor external contactors • LED status indication • AS-i system connection • Suitable for applications: - up to PL e/category 4 to EN ISO 13849-1 - up to SIL 3 to IEC 61508 - PFH: 5,4 x 10-9 / h