400 FBTU Balancing Machine for Wound Armatures
3Pages

{{requestButtons}}

Catalog excerpts

400 FBTU Balancing Machine for Wound Armatures - 1

HSCHENCK 400 FBTU Balancing Machine for Wound Armatures Advantages Manual loading and unloading Օ Automatic operating squence NC-axes for all sequence movements 镕 Prepared for integration with handling system Modular design Օ Powerful industry-PC-based measuring unit Range of application Measurement and correction of unbalance in wound armatures of various sizes and other similar rotors (external rotors). Use of the machine in series production for medium and large volumes. Unbalance correction by milling into the stack (profile/slot milling) in one or two planes. Sequence of operation Start the automatic sequence (run-up, measure, brake and index). The measured values are stored in the measuring unit and processed. The rotor is stopped and manually positioned in the correction station. Օ Start the automatic correction process: Clamp the rotor and mill in the 1st position. Unclamp, if necessary index to the 2nd correction component, clamp, mill, unclamp. For correction into two places, the milling slide is repositioned and the rotor is indexed to the required position. The slot-milling process is then repeated for the second plane. Օ After the correction process the rotor is once more loaded in the measuring station for checking the residual unbalance. Design Multi-station machine with automatic function sequence, manual loading. The work-pieces can be delivered to the machine by conveyor belt, on pallets or in cases. Modular, machine constructed for future extensions, prepared for integration with a work-piece handling system. Powerful measuring unit with graphic-capability color monitor, digital signal processor, software modules for calculation of standard and complex correction procedures, large rotor data memory, operator prompting, extensive automated setup procedures, diagnostic programs, statistics software, external interface. HSCHENCK Schenck RoTec GmbH Landwehrstrasse 55 D-64293 Darmstadt Telefon (0 61 51) 32 23 11 Telefax (0 61 51) 32 23 15 http://www.schenck-rotec.de E-Mail rotec@schenck.net

Open the catalog to page 1
400 FBTU Balancing Machine for Wound Armatures - 2

HSCHENCK 400 FBTU Balancing Machine for Wound Armatures The rotor is loaded into the balancing unit that has been setup for the rotor type and accelerated to balancing speed by the belt-drive. The measured unbalance values are calculated for correction and stored. Finally the rotor is stopped in a defined position.Run-up, measurement, brake and indexing are automatic.One or two measuring stations are possible. Change over to a new rotor type is quick and without problems. Only the bearing inserts and axial retainers of the balancing unit must be set up and the clamping piece for the...

Open the catalog to page 2
400 FBTU Balancing Machine for Wound Armatures - 3

HSCHENCK 400 FBTU Balancing Machine for Wound Armatures Technical data at a glance 422 FBTU Measuring unit CAB 850 CAB 850 Polar profile milling Slot-milling in components Օ Commutator armatures Weight [kg] 0,1 - 2,0 0,1 - 2,0 Diameter [mm] 24 - 66 24 - 82 Stack length [mm] 12 - 65 30 - 65 Total length [mm] 90 - 250 90 - 250 Stack inclination [mm] straight/skewed straight/skewed Machine Width A [mm] 1465 1465 Depth B [mm] 1870 1870 Height C [mm] 2046 2046 Balancing speed [min -1] 900 - 2000 900 - 2000 Measurement uncertainty [gmm] 0,02 - 0,1 0,02 - 0,1 Achievable tolerance [gmm] 0,4 - 1,8...

Open the catalog to page 3

All SCHENCK RoTec GmbH catalogs and technical brochures

  1. VIRIO

    6 Pages