MULTICOR® S - Feeding of Powdered Materials and Meal
4Pages

{{requestButtons}}

Catalog excerpts

MULTICOR® S - Feeding of Powdered Materials and Meal - 1

Coriolis Mass Flow Meter MULTICOR®-S Continuous mass flow measurement according to the Coriolis principle Highly accurate measuring principle Quick measurement value acquisition, with excellent control capability Rugged design Cost effective and easily integration Dust-tight housing Application Designed as an enclosed measuring system for the acquisition of flow rates and totalized amounts, the MULTICOR Coriolis mass flow meter is suited for throughput and consumption measurement: throughput and consumption measurement totalizing batching of materials with good to slightly sluggish flow properties. Equipped with controllable prefeeder (e.g. star feeder, flow gate or screw), the measuring system can also be used as feed system. The MULTICOR series offers solutions for many applications: MULTICOR-S Gravity feed into processes Equipment A MULTICOR-S Coriolis mass flow meter consists of: dust-tight stainless steel housing measuring wheel with guide vanes weighing module cable junction box AC three-phase geared motor. All contact parts are of stainless steel. The inlet connection for attachment to user´s infeed line is equipped with DIN flange or Jacob´s pipe connection. The outlet cone is equipped with a flexible sleeve for connection to user´s feed line. The weighing module arranged outside of material casing thus enabling the system to be used even at material temperatures of up to 130 °C. Functions The MULTICOR mass flow meter use the Coriolis force measurement principle to determine the mass flow. Within the device, the material flow to be measured hits a measuring wheel, rotation at constant speed. The material is accelerated to the measuring wheel circumferential speed by the guide vanes. This acceleration produces a torque directly corresponding to the flow rate. The torque is measured by a measuring module and converted into an electrical signal. The measurement is independent of mechanical material properties, e.g. grain size, flow behavior, moisture and temperature. The material friction on the measuring wheel and flow speed variations in the measuring system do not affect the measuring signal.

Open the catalog to page 1
MULTICOR® S - Feeding of Powdered Materials and Meal - 2

Dimensions [mm] Coriolis mass flow meter MULTICOR®-S40 Top View h=1185: disassembly wheighing section incl. drive unit without disassembly housing is possible space requirement: disassembly security device rotation direction measuring wheel conection point central earth line electrical conection point 2° .8 electrical conection point section inspection cover conection ring for flexible conection disassembly outlet cone F = 1,8 kN Coriolis mass flow meter MULTICOR®-S80 Top View h = 1420: disassembly wheighing section incl. drive unit without disassembly housing is possible electrical...

Open the catalog to page 2
MULTICOR® S - Feeding of Powdered Materials and Meal - 3

Coriolis mass flow meter MULTICOR®-S160 Top View space requirement : disassembly security device conection point central earth line rotation direction measuring wheel electrical conection point section inspection cover provide sufficent clearance for dismounting of outlet cone Ø 454 Ø 508 conection flange for JACOB - tubes, Rated width 250 Detail "Z" conection ring for flexible conection Coriolis mass flow meter MULTICOR®-S260 Top View conection point central earth line space requirement : disassembly security device electrical conection point section inspection cover provide sufficent...

Open the catalog to page 3
MULTICOR® S - Feeding of Powdered Materials and Meal - 4

Coriolis mass flow meter MULTICOR® Series Flow rate Accuracy rated to actual flow rate Setting range Operating pressure Pressure variations from ±0.5 % (depending on system configuration) 1 : 10 -10 mbar … +30 mbar + 5 mbar Ø140 mm (DIN 2501 DN 125) Inlet size Outlet connecting dimensions Weight Ambient temperature Material temperature Material density Ø249 mm (JACOB-pipe connection flange, nominal width 250) 230 kg 250 kg -25 °C … +40 °C (+50 °C) max. 130 °C min. density 0.3 t/m³ max. 5 mm max. 8 mm (single grain up to max. Ø30 mm) (single grain up to max. Ø30 mm) max. 1 % free flowing to...

Open the catalog to page 4

All Schenck Process Holding GmbH catalogs and technical brochures

  1. FulFiller ®

    8 Pages

  2. MaxiStore®

    8 Pages

  3. MULTIRAIL®

    16 Pages

  4. CONiQ®

    12 Pages

  5. MCPP

    12 Pages

  6. ModuPlasma

    8 Pages

  7. MaxiStore®

    8 Pages

  8. SacMaster®

    8 Pages

  9. Food industry

    20 Pages

  10. TEDO Conveyors

    18 Pages

  11. RotoScrew

    2 Pages

  12. DWB

    4 Pages

  13. MultiFlex

    4 Pages

  14. LinaClass®

    6 Pages

  15. Stock Valves

    8 Pages

  16. SacMaster

    1 Pages

  17. MULTIBELT®

    1 Pages

  18. DISOCONT ®

    4 Pages

Archived catalogs

  1. MULTIDOS® L

    4 Pages

  2. MULTIGRAV®

    4 Pages

  3. ProFlex® C

    2 Pages

  4. MULTIDOS® E

    4 Pages

  5. MULTIDOS® M

    4 Pages