Catalogs >
Schenck Process Holding GmbH >
MULTISTREAM® B - Solid Flow Meter low-cost and flexible

MULTISTREAM® B - Solid Flow Meter low-cost and flexible
4Pages

Catalog excerpts

MULTISTREAM® B - Solid Flow Meter low-cost and flexible - 1

MULTISTREAM® B Solids Flow Meter Flow rate measurement according to the impact plate principle Compact design - no loss of headroom due to additional chutes Cost effective, simple integration offset-free arrangement of inlet and outlet Dust-tight stainless steel housing Weighing electronics can be integrated in the mechanical system MULTISTREAM B Solids Flow Meters are designed as enclosed in-line measuring systems for continuous acquisition of flow rates and totalized amounts. With flow rates up to 100 t/h, or max. 80 m³/h, these measuring systems can be used for flow rate and consumption measurement totalization and batching of pulverized to granular materials with a grain size of up to 30 mm. Equipped with a controllable prefeeder, MULTISTREAM B is also available for use as a feed system, upon request. The standard equipment of MULTISTREAM B Solids Flow Meters comprises: Stainless steel housing Impact plate Load cell Integrated electronic box Designed as a complete module for local operation, the ECOCONT weighing electronics can be easily accommodated in the box which is integrated in the measuring system. Of course, it is also possible to install the weighing electronics outside of the measuring system, e.g. in the control cabinet. Measuring systems operating according to the impact plate principle acquire the flow rate by means of a reactive force. Its inlet/outlet arrangement without offset makes this measuring system specially suitable for economical integration into existing production plants. BV-D2034GB Guided by the inlet pipe, the material stream hits the impact plate mounted at a defined angle of inclination. The load cell and the weighing electronics acquire the horizontal component of the reactive force. Material build-ups do not affect the measuring result. Reproducible conditions of material feed, e.g. height and speed of fall or angle of impact, provide for highest accuracies. If higher accuracies are required, check measurements are necessary which allow the measuring system to be calibrated without interrupting material flow. Requiring a presilo to be weighed, this additional equipment is available upon request.

Open the catalog to page 1

MULTISTREAM® B - Solid Flow Meter low-cost and flexible - 2

MULTISTREAM B80 Solids Flow Meter Electronic housing

Open the catalog to page 2

MULTISTREAM® B - Solid Flow Meter low-cost and flexible - 3

Technical Data MULTISTREAM B80 Solids Flow Meters Flow rate ±2 % of nominal flow rate Measuring range Operating pressure Inlet/outlet flange dimensions (DIN) Ambient temperature Material temperature Bulk density Grain size Flow properties pulverized to granular, non sticky Additional Requirements Order Data Stated accuracy relates to maximum (nominal) flow rate in the range of 20 % - 100 % (measuring range 1:5) under the following conditions: Constant material properties (flow behaviour, moisture, temperature, grain size) System installed and calibrated in accordance with our Installation...

Open the catalog to page 3

MULTISTREAM® B - Solid Flow Meter low-cost and flexible - 4

MULTISTREAM B80, Solids Flow Meter, max. 80 m³/h MULTISTREAM B80 Service Manual German English French One set of documentation is supplied as standard. Should you need additional copies, please order separately. Remember to indicate desired language version. Schenck Process GmbH Pallaswiesenstr. 100 64293 Darmstadt, Germany Phone: Fax: sales@schenckprocess.com wwww.schenckprocess.com BV-D2034GB 1135 All information is given without obligation. All specifications are subject to change. © by Schenck Process GmbH, 2011

Open the catalog to page 4