MechaTron® The Modular Feed System With Integrated Measuring, Control, and Supervisory Electronics
8Pages

{{requestButtons}}

Catalog excerpts

MechaTron®  The Modular Feed System With Integrated Measuring, Control, and Supervisory Electronics - 1

MechaTron® – Simply Well-Fed. of making processes work MechaTron® – The Modular Feed System With Integrated Measuring, Control, and Supervisory Electronics we make processes work

Open the catalog to page 1
MechaTron®  The Modular Feed System With Integrated Measuring, Control, and Supervisory Electronics - 2

MechaTron® The feed system for any bulk solid

Open the catalog to page 2
MechaTron®  The Modular Feed System With Integrated Measuring, Control, and Supervisory Electronics - 3

Looking for a partner for planning and realizing your feed system? The answer is: Schenck Process – a company that has made a name for itself by designing and supplying state-of-the-art weighing, feeding, and screening systems. With our MechaTron® feed system, we are successfully represented in the marketplace. The MechaTron® is designed to feed bulk solids of all kinds, e.g. powders, granules, pellets, chips, and fibers. Volumetric or gravimetric – thanks to its modular construction and versatile combinations, all types of feed applications can be realized in the feed rate range from 0.2...

Open the catalog to page 3
MechaTron®  The Modular Feed System With Integrated Measuring, Control, and Supervisory Electronics - 4

MechaTron® Series Choose as you please. Depending on the feed rate, you can select 4 different series for the ranges from 0.2 dm3/hr to 32 m3/hr for use in volumetric and gravimetric applications either as Coni-Flex® or Coni-Steel® variant. Small Range: Feed rates min./max.: 0.2 to 22 dm3/hr Low Range: Feed rates min./max.: 0.4 to 1,500 dm3/hr Mid Range: Feed rates min./max.: 4 to 10,000 dm3/hr High Range: Feed rates min./max.: 36 to 32,000 dm3/hr

Open the catalog to page 4
MechaTron®  The Modular Feed System With Integrated Measuring, Control, and Supervisory Electronics - 5

We are testing for you! Difficult-to-feed materials or new applications? Upon request, we will test your bulk solids in our test field, for you to be sure that our feed systems operate perfectly. Put our science to work for you. Evaluation electronics and control in the Schenck Process test field. The Right Discharge Unit For Any Material The MechaTron® offers the right discharge unit for any feed duty. Single and twin screws as well as vibro feeders are available. Single discharge units are used for freeflowing to slightly sluggish materials. Thanks to the simple and rugged design of...

Open the catalog to page 5
MechaTron®  The Modular Feed System With Integrated Measuring, Control, and Supervisory Electronics - 6

Quick and Easy Material Change. The MechaTron® enables the contact parts to be removed and mounted from the non-process side for material change and cleaning, thus minimizing downtimes and reducing operating costs. Removing screw Swivelling motor MechaTron® – Coni-Flex® The discharge unit motor assembly can be swivelled around an axle located parallel to the feed screw. When the motor is swivelled out of its operating position, discharge unit, shaft sealing and feed hopper can be accessed with utmost ease. A single operator can remove feed screw and hopper with few movements. Removing feed...

Open the catalog to page 6
MechaTron®  The Modular Feed System With Integrated Measuring, Control, and Supervisory Electronics - 7

MechaTron® – Electronics Integrated. Swivelling motor With the MechaTron® feed systems, the electronics including the DISOCONT® measuring and control system are incorporated into the mechanical system. MechaTron® – Coni-Steel® The vertical agitator is split. The feed hopper can easily be removed with no need to dismount the complete agitation system. So the system leaves scope for individual planning since the precious headroom can be optimally used. Small size Reduced cabling Lower prime costs Easy servicing Electronics and mechanics form a unit and can easily be integrated into the...

Open the catalog to page 7
MechaTron®  The Modular Feed System With Integrated Measuring, Control, and Supervisory Electronics - 8

4000.11.06 di • All information is given without obligation. All specifications are subject to change. Schenck Process is the global market leader of solutions in measuring and process technologies in industrial weighing, feeding, measuring and automation. Schenck Process develops, manufactures and markets a full range of solutions, products and turnkey systems on the basis of combining process engineering expertise, reliable components and field-proven technology. Schenck Process GmbH Pallaswiesenstr. 100 64293 Darmstadt, Germany T +49 61 51-32 11 19 light@schenckprocess.com...

Open the catalog to page 8

All Schenck Process Holding GmbH catalogs and technical brochures

  1. FulFiller ®

    8 Pages

  2. MaxiStore®

    8 Pages

  3. MULTIRAIL®

    16 Pages

  4. CONiQ®

    12 Pages

  5. MCPP

    12 Pages

  6. ModuPlasma

    8 Pages

  7. MaxiStore®

    8 Pages

  8. SacMaster®

    8 Pages

  9. Food industry

    20 Pages

  10. TEDO Conveyors

    18 Pages

  11. RotoScrew

    2 Pages

  12. DWB

    4 Pages

  13. MultiFlex

    4 Pages

  14. LinaClass®

    6 Pages

  15. Stock Valves

    8 Pages

  16. SacMaster

    1 Pages

  17. MULTIBELT®

    1 Pages

  18. DISOCONT ®

    4 Pages

Archived catalogs

  1. MULTIDOS® L

    4 Pages

  2. MULTIGRAV®

    4 Pages

  3. ProFlex® C

    2 Pages

  4. MULTIDOS® E

    4 Pages

  5. MULTIDOS® M

    4 Pages