Group: Schaltbau GmbH
Catalog excerpts
Connect Contact Control Snap-action switches Series S847 Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.en
Open the catalog to page 1Snap-action switches, S847 Series Dual changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation S847 series snap-action switches are VDE approved and come with positive opening operation which guarantees that these switches will function even if the contacts have become welded due to a short-circuit. They have two galvanically isolated, mechanically linked contact bridges which prevent a circuit closing failure. Protected against dust, moisture and pollutants (IP40, IP60 and IP67 rated versions available) and with wiping,...
Open the catalog to page 2Special designs, optional Return spring strengthened, B snap spring standard Magnetic blowout L Snap-action switch Contact configuration W Form Z-SPDT-DB IP rating Contacts IP40 IP60 IP67 IP67 Actuator Push button Roller lever This catalogue shows only stock items. For some variants minimum quantities apply. Please ask for the conditions. Contact material 2 Silver 8 Silver, gold-plated Special variant: If you need a special variant of the switch, please do not hesitate to contact us. Maybe the type of switch you are looking for is among our many special designs. If not, we can also...
Open the catalog to page 3*1 Data for gold contacts upon request *2 Measured next to push button 3 General Purpose *4 Leads -20 °C...+85 °C 5 A slower release actuation may occur by rapidly changing air pressure /j\ Note: Data valid for new switches under laboratory conditions and at room temperature, unless otherwise mentioned. Specifications are subject to alteration without prior notice
Open the catalog to page 4• Dimensions S847 W1A2a / S847 W2A2a / S847 W5A2a Form Z-SPDT-DB: 4 terminals, galvanically isolated contact bridges, positive opening operation and wiping action © Screwable thread length of fastening screw • Circuit diagram @ Magnetic blowout (optional) for increased DC breaking capability © Free position Form Z-SPDT-DB Contacts IP40 / Terminals IP00 Contacts IP40 / Terminals IP00 Contacts IP67 / Terminals IP00 M3 screws Contact material: silver Push button (standard) Actuator styles and positions • S847 W rai / S847 W |~c1 Push button (standard) Actuator position Note: To ensure...
Open the catalog to page 51. Push button (standard) no mounting brackets a 1. Push button (standard) no mounting brackets a 2. Push button with mounting brackets c 28±0.15 3.7 ... 5 Screwable thread length of fastening screw Ganging (side mount) ●● Through the two transversal holes in the body of the switch by means of a collar screw or threaded bolt . Tightening torque 1.0 Nm max. ●● Alternatively, DUO-Clips or retaining rings can be used. Front mount ●● Without mounting brackets (standard): Fastening by way of the retainer nuts (M3) which are fixed in the housing of the switch. Tightening torque 0.7 Nm max. ●●...
Open the catalog to page 6Mounting Use of roller levers Snap-action switches are designed for actuation with and without a roller lever. A roller lever is required if the direction of actuation deviates more than ±15° from the plunger axis. ●● Switch with roller lever actuated by linear cam Total travel pos. + 0.2 ... 0.3 ●● Switch with roller lever actuated by cam disc Mounting and safety instructions, environmental conditions Mounting instructions: ●● Snap-action switches should be mounted by qualified professional staff only. ●● Observe the required clearance and creepage distances. This is also applicable for...
Open the catalog to page 7Schaltbau GmbH with compliments: For detailed information on our products and services visit our website – or give us a call! Schaltbau GmbH Hollerithstrasse 5 81829 Munich Germany Schaltbau GmbH manufactures in compliance with RoHS. The production facilities of Schaltbau GmbH have been IRIS certified since 2008. Certified to DIN EN ISO 14001 since 2002. For the most recent certificate visit our website. Certified to DIN EN ISO 9001 since 1994. For the most recent certificate visit our website. Electrical Components and Systems for Railway Engineering and Industrial Applications Charging...
Open the catalog to page 8All Schaltbau GmbH catalogs and technical brochures
-
Catalogue CP Series
16 Pages
-
Flyer C320
8 Pages
-
UIC-IT Series
12 Pages
-
Brochure
8 Pages
-
Enabling switches S834
6 Pages
-
Connectors
7 Pages
-
Electrics for Rolling Stock
16 Pages
-
EKS127 Series
4 Pages
-
SH-1P, SH2P, SH-3P Series
2 Pages
-
LV Series
12 Pages
-
Series NF07, NF10
40 Pages
-
SB Series
8 Pages
-
GA Series
10 Pages
-
G, GM series
44 Pages
-
Snap-action switches S880
12 Pages
-
Brochure en
6 Pages
-
S880 Series
12 Pages
-
Terminal bolts EKS 127
4 Pages
-
Overview Connectors
12 Pages
-
Manual, Connectors to UIC 558
26 Pages
-
Connectors to UIC 558
12 Pages
-
DC contactors 4 pole
6 Pages
-
DC NO contactors
6 Pages
-
Enabling switches, S834
6 Pages
-
Snap-action switches, S840
8 Pages
-
Snap-action switches, S847
8 Pages
-
Snap-action switches S826
8 Pages
-
Snap-action switches, S926
12 Pages