Group: Schaltbau GmbH
Catalog excerpts
Connect - Contact - Control 1 more information here: schaltbau-gmbh.com Connectors Series M Circular Modular Connectors C atalogue A10.en
Open the catalog to page 1Circular modular connectors: M1 and M3 Series M1 and M3 Series universal industrial connectors are designed for safety and reliability also in harsh environments. Vibration, dust, aggressive liquids or vapours are often the cause of failures and serious safety problems. Sealed to IP67 or IP69K, our M1 and M3 Series circular connectors are dustproof, pressure proof and water protected when mated. They are also largely resistant to the effects of most acids and alkalis as well as the extremes of temperature. The modular connector design allows many variations of assembly to fit your...
Open the catalog to page 2Series Ml, M3 Number of contacts max. Contact arrangement Contact identification as marked on insert: Pin insert: Rear view Socket insert: Front view Contacts / Identification as marked on insert: Pin insert: Socket insert: Rear view Front view and a|titude correction factor 1 (lEC 60664-1) @ Earth contact @ Earth contact @ Earth contact I Earth contact @ Earth contact I Earth contact Current rating of individual contact, max. * Type of contact *2: a! Pin SAC-x / Socket BAC-x |aI 4 x 16 A |aI 6 x 16 A |bI 6 x 32 A j 3 X ^ A |a| 12 x 16...
Open the catalog to page 3T1-x Cable sleeve (Page 11) Pg M1 Pg13,5 10-12 Cable gland Pg13.5 (Page 10) M M1 VM20 8-13 Cable gland M20x1,5 (Page 10) M16 Z / M16 ZB Cable plug with backshell, strain relief and cable gland (Page 8) M16 Cable plug with backshell and cable gland (Page 8) M15 Flange plug (Page 8) SAC-x.xx-yy Pin contact (Page 18) BAC-x.xx-yy Socket contact (Page 18) BS-A-V10 Filler plug (Page 18) M1 E-4S+PE Socket insert (Page 11) M1 KS Protection cap for plugs (Page 11) Pg M1 E-6S + PE Socket insert (Page 11) M16 W Threaded plug for use with backshell/ shrink boot (Page 8) M1 K Protection cap for plugs...
Open the catalog to page 4M1 E-4P+PE Pin insert (Page 12) M1 DS Protection cap for receptacles (Page 11) M1 E-4S+PE Socket insert (Page 12) M1 E-6P+PE Pin insert (Page 12) M1 D Protection cap for receptacles (Page 11) SAC-x.xx-yy Pin contact (Page 18) BAC-x.xx-yy Socket insert (Page 18) BS-A-V10 Filler plug (Page 18) M11 Z / M11 ZB Cable receptacle with backshell, strain relief and cable gland (Page 9) T1-x Cable sleeves (Page 11) M11 Cable receptacle with backshell and cable gland (Page 9) Pg M14 Pg13,5 Pg13.5 threaded receptacle (Page 9) M M1 E-6S + PE Socket insert (Page 12) Cable gland M14 M20 M20x1.5 threaded...
Open the catalog to page 5Series M1, M3 assembly. The following table is a summary of all available individual components of our M1 and M3 Series connectors. Our M1 and M3 Series connectors consist of various components which you can order individually, thus assembling a connector that suits your application to a T. Please note that according to our price list minimum order quantities apply. For orders below that minimum our distributors will be at your service. Our “Overview” on pages 4 and 5 will help you with the details of the Ordering code Brief description Shrink boot, straight (order direct from Raychem or...
Open the catalog to page 6Note: Presented in this catalogue are only stock items which can be supplied in short delivery time. For some variants minimum quantities apply. Please do not hesitate to ask for the conditions.. Special variants: If you need a special variant, please do not hesitate to contact us. Maybe the type of connector you are looking for is among our many special designs. If not, we can also supply customized designs. In this case, however, minimum ordering quantities apply. (Continued from page 6) Specifications are subject to alteration without prior notice
Open the catalog to page 7• M16 Z, M16 ZB Cable plug with backshell, strain relief and cable gland Ordering code Note: * To prevent the strain relief from loosening use two self-tapping cylinder head screws 2.2 x 9.5 (not included in delivery) ** Cable sleeve T1-x required All M1 inserts can be used with these plugs • M16 Cable plug with backshell and cable gland Ordering code Note: ** Cable sleeve T1-x required All M1 inserts can be used with this plug Ordering code Note: • AllM1 inserts can be used with this plug • Mounted with M3 screws, torque 2.5 Nm. • M16 W Plug with threaded rear skirt (for use with backshell...
Open the catalog to page 8Mil Z, Mil ZB, Mil, M13, M14 xx Receptacle shells, Part 1 • M11 Z, M11 ZB Cable receptacle with backshell, strain relief and cable gland Ordering code Note: * To prevent the strain relief from loosening use two self-tapping cylinder head screws 2.2 x 9.5 (not included in delivery) ** Cable sleeve T1-x required All M1 inserts can be used with these receptacles • M11 Cable receptacle with backshell and with cable gland Ordering code Note: ** Cable sleeve T1-x required All M1 inserts can be used with this receptacle Ordering code Note: • AllM1 inserts can be used with this receptacle • Mounted...
Open the catalog to page 9M18 Receptacle shells, Part 1 (continued) Ordering code Note: • All M1 inserts can be used with this receptacle • M1 VPg13,5 10-12 Pg13.5 threaded cable gland O-Ring Ordering code Ordering code Ordering code Dimensions in mm / Specifications are subject to alteration without prior notice
Open the catalog to page 10T1-xx/xx Cable sleeves/seals, Shells Part 2 Series Ml • T1-4/6, ... , T1-12/13 Cable sleeve, Fig. A • T1-14.5 Sealing ring, Fig. B T1-4/6 T1-6/8 T1-8/10 ► Specifications are subject to alteration without prior notice /Dimensions in mm
Open the catalog to page 110... © 6x Socket BAC-x © 1x Pin SAC-x M1 Series: Number of contacts, max. *1 Depending on wire gauge (see »Specifications«, page 3) as well as operating temperature (see»Derating diagrams«, page 19) *2 For a detailed description see »Contacts«, page 18 Note: Empty cavities should be fitted with filler plugs. See also page 18. Dimensions in mm / Specifications are subject to alteration without prior notice
Open the catalog to page 12M36 Z, M36 ZB, M36, M35, M36 W Plug shells, Part 1 • M36 Z, M36 ZB Cable plug with backshell, strain relief and cable gland Ordering code Note: * To prevent the strain relief from loosening use two selftapping cylinder head screws 2.9x 13 (not included in delivery) ** Cable sleeve T28-x required All M3 inserts can be used with these plugs Ordering code Note: • All M3 inserts can be used with this plug • Mounted with M4 screws, torque 2.5 Nm. • M36 W Plug with threaded rear skirt (for use with backshell or shrink boot) Ordering code Note: • All M3 inserts can be used with this plug • Plug...
Open the catalog to page 13All Schaltbau GmbH catalogs and technical brochures
-
Catalogue CP Series
16 Pages
-
Flyer C320
8 Pages
-
UIC-IT Series
12 Pages
-
Brochure
8 Pages
-
Enabling switches S834
6 Pages
-
Connectors
7 Pages
-
Electrics for Rolling Stock
16 Pages
-
EKS127 Series
4 Pages
-
SH-1P, SH2P, SH-3P Series
2 Pages
-
LV Series
12 Pages
-
Series NF07, NF10
40 Pages
-
SB Series
8 Pages
-
GA Series
10 Pages
-
G, GM series
44 Pages
-
Snap-action switches S880
12 Pages
-
Snap-action switches S847
8 Pages
-
Brochure en
6 Pages
-
S880 Series
12 Pages
-
Terminal bolts EKS 127
4 Pages
-
Overview Connectors
12 Pages
-
Manual, Connectors to UIC 558
26 Pages
-
Connectors to UIC 558
12 Pages
-
DC contactors 4 pole
6 Pages
-
DC NO contactors
6 Pages
-
Enabling switches, S834
6 Pages
-
Snap-action switches, S840
8 Pages
-
Snap-action switches, S847
8 Pages
-
Snap-action switches S826
8 Pages
-
Snap-action switches, S926
12 Pages