Website:
Schaltbau GmbH
Group: Schaltbau GmbH
Catalog excerpts
Connect Contact Control Contactors C110B/80, C110B/120 C110B/200, C110B/300 Single pole DC NO contactors for industrial trucks Catalogue B71.en
Open the catalog to page 1
C110B Series DC NO contactors for battery voltages C110B Series contactors are the cost-effective and environmentally friendly solution to switching DC currents ranging from 60 A to 300 A and battery voltages up to 48 V. The NO contactors are fitted with DC coils that have a coil tolerance as required by modern traction batteries of industrial trucks and other electric vehicles. The single pole contactors are especially designed for use as main contactors or auxiliary contactors in all kinds of battery-powered vehicles in material handling. Due to economical material consumption (e.g. using...
Open the catalog to page 2
C110B/300 Single pole NO contactors Ith = 240 A DC Main terminal »1+«: Threaded stud M10, tightening torque 10 Nm max. Main terminal »2–«: Threaded stud M10, tightening torque 10 Nm max. Coil terminal »A1«: Flat tabs 6.3x0.8 according to DIN46244 Coil terminal »A2«: Flat tabs 6.3x0.8 according to DIN46244 Clearance 5 mm to all sides of earthed as well as live parts Stud terminals: Do not use the nut for termination! Nuts and washers for termination not included in delivery Mounting with 4x M5 screws on each side, maximum length of thread engagement 3 mm, tightening torque 2 Nm C110B/200...
Open the catalog to page 3
C110B/120 Single pole NO contactors Ith = 100 A DC Circuit diagram Main terminal »1+«: Threaded stud M8, tightening torque 7 Nm max. Main terminal »2–«: Threaded stud M8, tightening torque 7 Nm max. Coil terminal »A1«: Flat tabs 6.3x0.8 according to DIN46244 Coil terminal »A2«: Flat tabs 6.3x0.8 according to DIN46244 Clearance 5 mm to all sides of earthed as well as live parts Stud terminals: Do not use the nut for termination! Nuts and washers for termination not included in delivery Mounting with 4x M5 screws on each side, maximum length of thread engagement 2.5 mm, tightening torque...
Open the catalog to page 4
Connect Contact Control
Open the catalog to page 5
Schaltbau GmbH with compliments: For detailed information on our products and services visit our website – or give us a call! Schaltbau GmbH Hollerithstrasse 5 81829 Munich Germany Schaltbau GmbH manufactures in compliance with RoHS. The production facilities of Schaltbau GmbH have been IRIS certified since 2008. Certified to DIN EN ISO 14001 since 2002. For the most recent certificate visit our website. Certified to DIN EN ISO 9001 since 1994. For the most recent certificate visit our website. Electrical Components and Systems for Railway Engineering and Industrial Applications Special...
Open the catalog to page 6All Schaltbau GmbH catalogs and technical brochures
-
Catalogue CP Series16 Pages
-
Flyer C3208 Pages
-
UIC-IT Series12 Pages
-
Brochure8 Pages
-
Enabling switches S8346 Pages
-
Connectors7 Pages
-
Electrics for Rolling Stock16 Pages
-
EKS127 Series4 Pages
-
SH-1P, SH2P, SH-3P Series2 Pages
-
LV Series12 Pages
-
Series NF07, NF1040 Pages
-
SB Series8 Pages
-
GA Series10 Pages
-
G, GM series44 Pages
-
Snap-action switches S88012 Pages
-
Snap-action switches S8478 Pages
-
Brochure en6 Pages
-
S880 Series12 Pages
-
Terminal bolts EKS 1274 Pages
-
Overview Connectors12 Pages
-
Manual, Connectors to UIC 55826 Pages
-
Connectors to UIC 55812 Pages
-
DC contactors 4 pole6 Pages
-
DC NO contactors6 Pages
-
Enabling switches, S8346 Pages
-
Snap-action switches, S8408 Pages
-
Snap-action switches, S8478 Pages
-
Snap-action switches S8268 Pages
-
Snap-action switches, S92612 Pages
