Connectors to UIC 558
12Pages

Connect - Contact - Control 1 More information at: schaltbau-gmbh.com Connectors UIC Series Inter-car jumpers to UIC 558 VE Catalogue F120.en

UIC Series Inter-car jumpers to UIC 558 VE Schaltbau jumpers for inter-car connections to UIC standard – cost-effective, durable and highly reliable The rugged jumpers typically connect lines used for the remote control of lights and train doors or for public address systems in passenger coaches of trains or diesel and electric multiple units. They are also ideally suited for the transmission of binary data, as for instance, via CAN bus. Break-away connector that ensures, provided the receptacle is installed in the correct position, a non-destructive separation of plug and receptacle when...

Specifications UIC Series Jumpers to UIC standard Layout Contact cavities:    implemented    empty Contact arrangement Contact identification marked on insert   Pin insert: rear view   Socket insert: front view Rated operating voltage, no PE Rated operating voltage, plus PE Crimp, machined contacts Crimp, machined contacts Crimp, machined contacts Pin contacts Socket contacts --- Pin contacts Socket contacts Pin contacts, socket contacts in replacement insert Pin contacts Socket contacts --- Current rating of individual contacts Terminal type Contact diameter Connector type   Cable plug...

Plug / receptacle / dummy / empty  SK Plug 13 pole, pre-assembled with connector cable and cable harness Plug, pre-assembled with connector cable SL VK Connector cable, double ended, pre-assembled ST Plug DK Socket insert 13 pole, pre-assembled with connector cable and harness DL Socket insert, pre-assembled with connector cable BT Replacement insert, requiring CA * Crimp adapter, requiring BT * CA KD Receptacle * BD Dummy receptacle with insert, no contacts Empty receptacle, no insert implemented LD KK Cable gland Pg21 for through hole mounting Insert: Number of / type of contacts /...

Stock items Variants for 18 pole jumpers ●● UIC SL 18P ER D2 Lxxxx  Connector cable, single ended Series Plug with single ended connector cable 18 pole, pins, nickel plated Colour of backshell: black Colour marking of backshell: red Cable gland Ø 16.5 ... 18.5 mm Cable length in mm as required ●● Receptacle with insert and connector cable, including: Series UIC ●● UIC VK 18P ER D2 Lxxxx  Connector cable, double ended Series Plug with double ended connector cable 18 pole, pins, nickel plated Colour of backshell: black Colour marking of backshell: red Cable gland Ø 16.5 ... 18.5 mm Cable...

Connector cable pre-assembled cable sets for plugs• UIC SK 13P EO Lxxxx 13 pole plug with single ended connector cable and cable harness Single ended connector cable with 13 pole plug and cable harness, pre-assembled with the length you require Cable length LxxxxTolerance <. 2,000mm ±20mm ®Nole: 13 pole plug, with 18 wire connector cable IS wires not used) Single ended connector cable with 18 pole plug, pre-assembled with the length you require Cable length LxxxxTolerance <2,000mm ±20mm Connector cable pre-assembled cable sets for plugs Series UIC Double ended connector cables with...

Connector cable pre-assembled cable sets for receptacles ●● 13 pole receptacle with socket insert and single ended connector cable with cable harness, including: Empty receptacle UIC see table 1 Socket insert13 pole see table 2 yellow white red black 6 yellow white red black 11 Socket insert with single ended connector cable and cable harness, pre-assembled with the length you require, see Fig. Empty receptacle, see Fig. Ordering code Ordering code Cable length Lxxxx in mm Note: 13 pole socket insert with 18 wire connector cable (5 wires not used) ●● 18 pole receptacle with socket insert...

Replacement insert for rececptacle pre-assembled ●● Replacement insert for 18 pole receptacles Schaltbau has developed a new replacement insert for the 18 pole recept­ cle which is likely to re­ uce main­ enance and downtime a d t consider­ bly. For if during main­ enance it becomes necessary to rea t Features ●● Replacement insert implemented with sockets on both ends ●● Crimp adapter with per-assembled cable ●● Insert can be replaced on site ●● No need of rewiring the rail vehicle ●● No need of electrical testing the jumper's contacts and wires place worn contacts, there is no need of a...

Colour marking Cable gland cable diameter D1: 12.5 ... 15.5 mm D2: 16.5 ... 18.5 mm Cable gland black Colour marking: red Ordering code black Colour marking: blue Note: ●● All pin contacts included in delivery ●● For other options, such as different shell colours, refer to Ordering code, p. 4, or contact us Receptacle, dummy and empty receptacle ●● Receptacle, dummy: 13, 18, 22 pole ●● Empty receptacle: Shell only 65 Receptacle with socket insert and crimp contacts see table 1 Empty receptacle no socket insert no crimp contacts see table 3 Dummy receptacle with socket insert no crimp...

Nut Strain relief bushing black Spring disc Supporting ring black Ordering code Assembly and disassembly Tools • Crimp tool (BBR !■— • Extraction tool Ordering code Extraction tool for Ordering code Crimp tool for • Extraction tool (not shown) Cable 18pole cable connectors, single and double ended Both single and double ended 18 pole cable connectors comply with the EN 45545 standard and are delivered by the metre. Ordering code: UIC558 adapter cable 18-pin • Train bus: • Signal cable: • Shielded cable: Note: This type of cable is used for our pre-assembled 13 and 18 pole...

Installation and safety instructions The UIC Series inter-car jumpers dealt with in this catalogue are intended for use with low-voltage systems and special installations. They are designed and tested in compliance with the generally recognised state of the art. However, the improper use, operation, handling, Due to our continuous improvement programme, the design of our products can be modified at any time. So some features may differ from the descriptions, specifi­ cations and drawings in the catalogue. You can download the latest update of the catalogue at schaltbau.info/download1en....