PERFECT ROUND HOLES CONCENTRIC & ACCURATE HOLES . . HOLE TAPER CONTROLLED . NO ANGLE LIMIT . NO BURNING EFFECT . NO MATERIAL ALTERATION . ACCURATE COMPLEXE HOLES WITHOUT ENTRANCE AND EXIT DEFORMATION . . HIGH SURFACE QUALITY . HIGH PRODUCTIVITY HIGH PRECISION FINISHING IF YOU NEED THIS TOP PERFORMANCE WITH FAST MACHINING TIMES, WITHOUT MATERIAL ALTERATION, CALL SARIX OR VISIT US @ WWW.SARIX.COM • The versatility of the SX-200 Dual machine brings now new innovative possibilities on the 3D high precision Micro Machining. • The capabilities of the combination of the high speed end mill milling gives now the advantages of an effective machining time reduction. • Micro end mill used up to 60’000 rpm associated to the milling machining strategies of the SX-3D Milling CAM software prepares the fine roughing of the work piece. • The same Milling CAM software execute the finishing of the work piece with the SARX modul SX-3D Micro EDM Milling CAM through efficient machining electrode wear compensation and Micro EDM strategies. • The additional automatic electrode wear compensation and electrode re-feeding rotating spindle associated with the indexing function (C) and the electrode shaping on the Wire EDM device (SX-Arianne) opens up new opportunities of size and form electrode for a full continuous “One setup” machining process. • Micro EDMing machining technology with solid carbide electrode from 45 Microns to 3.0 mm. • Micro EDM Milling of Micro forms and Micro structure down to 20 Microns • Micro EDM Milling high surface finishing down to Ra 0.1 with the SX-MFPS Micro Fine P

TECHNICAL SPECIFICATIONS TYPICAL CONFIGURATION SX-200 DUAL High Precision • SX-200-HPM machine including SX-MPS, Micro Pulse Shape Generator SX-CU, CNC Control UNIT with SX-ICON Editor free programming software SX-KBS, Knowledge Base - Drilling Data Base Software SX-MMI-Remoting, machine monitoring remoting software • SX-MFPS, Micro Fine Pulse Shape generator for Micro Fine Machining with ultrafine finishing • SX-DA, Dielectric unit with conductivity and temperature control for mass production SX-DA-HC, High filtering capacity unit on options (deionised water or dielectric oil) • SX-HP, High...