Stackers : PS and HS series - Sandvik Mining and Sandvik Construction - #1

Text version of the page

Stackers PS and HS series Stackers - Product Range Sandvik stackers effectively stockpile bulk materials in an efficient and orderly manner. Stationary or traveling, borne on rails or crawlers, they can be supplied in fixed, luffable or luffable-and-slewable boom designs, with capacities from 150 to 20 000 tonnes per hour. The choice of design depends on factors such as the stacking method (Chevron, Windrow and Cone Shell) and size of the stockpile, the type of material, the required throughput and the demand for mobility. Tripper cars or tripper systems for transferring material from the yard conveyor to the stacker are considered part of the stacker. LUFFABLE AND SLEWABLE STACKERS PS100 - PS300 This type of stacker is able to luff and slew the boom and designed to service stockpiles on both sides of the rails. The higher initial cost of this stacker is quickly recovered by economies gained from their flexible mode of operation, as well as their ability to effect good layering and excellent blending. Boom length can range from 10 to over 60 meters, and the exact configuration, as well as the operational features, will always depend on the application. The following three configuration can be provided: PS100 - PYLON TYPE Used for standard heavy-duty applications. PS200 - CANTILEVERED TYPE Simple design and used for light-duty applications with low migration of center of gravity. PS300 - ROCKER TYPE To minimize migration of center of gravity in operation to allow for an economic rail gauge and to keep utilizable stockyard width at a maximum. LUFFABLE STACKERS PS400 Luffable-only stackers are used for applications where the stockpile is required to be stacked from one side only, with little or no demand for blending. The absence of a slewing mechanism makes them an economical option in the right applications. Boom length can range from 10 to over 60 meters, and the exact configuration, as well as the operational features, will depend on the application. STANDARD STACKING CONVEYORS HS SERIES HS SERIES - MOVABLE TYPE The standard range of movable stackers covers belt widths (650, 800, 1 000, 1 200 and 1 400 mm) each having different lengths up to 40 m. The movable stacking conveyors have a typical capacity range of 300 to 2 800 tonnes per hour. A combination of movable feeder and stacking conveyor can be used to load barges or ships, or equal. HS SERIES - RADIAL TYPE The standard range of radial stackers covers 3 belt widths (650, 800 and 1 000 mm) each having 5 different lengths (20, 25, 30, 35 and 40 m) for a typical capacity range of 200 to 1 200 tonnes per hour. Adopting of the stacker conveyor allows stockpiles to be more strategically placed, more quickly processed and, when there is a series of stackers, it can work faster and more efficiently than fixed conveyors. PS100 PS200 PS300 PS400 HS series - movable type HS series - radial type