Stacker/Reclaimers PD series - Sandvik Mining and Sandvik Construction - #1

Text version of the page

Stacker/Reclaimers - Product Range Sandvik stacker/reclaimers come in two main types: bucket-wheel models for alternate stacking and reclaiming, and circular units, which normally stack and reclaim the material alternately but can be designed to do so simultaneously if required. Our bucket-wheel models, normally supplied complete with tripper cars, are compact and economical for longitudinal stockyards where simultaneous stacking and reclaiming is not required and where there can be large variations in the demand for stacking and reclaiming capacity. Our standard circular units, which build a ring-shaped stockpile and are normally housed inside a covered dome due to environmental concerns, both continually stack the stockpile at one end of the ring and reclaim the material simultaneously from the other end. Boom-type bucket wheel STACKER/Reclaimers PD100 - PD200 Borne on rails or crawlers, Sandvik bucket-wheel stacker/reclaimer rigs can be supplied in many configurations and sizes, with booms up to 60 meters in length and stacking/reclaiming capacities up to 20 000 tonnes per hour. Like all Sandvik materials handling machines, they are controlled by state-of-the art PLC (programmable logic controllers) systems with user-friendly interfaces and can be supplied with advanced automation capabilities. Tripper cars or tripper systems for transferring material from the yard conveyor to the stacker/reclaimer are considered part of the machine. All of our units are custom built for each individual application, with the customer`s need in mind. PD100 PD200 PD300 PD300-3500/100+120, Ho Ping Dome 2 - Taiwan PD100-1600/44, Dalian Ore - China PD100-1200/50, Antwerp - Belgium PD200-2200/62, Dalrymple Bay 7X - Australia PD200-1200/40, Immingham - Great Britain PD200-2100/50, Vitoria - Brazil PD100-1200/40, Bourgas - Bulgaria PD300-50/1000+78, BPC - Bahrain PD100-1200/40, Koper - Slovenia PD300-3500/100+120, Ho Ping Dome 1 - Taiwan PD100-1800/43,Tianjin I - China Circular stacker/reclaimers PD300 In circular stockpiles, normally housed inside a dome, the pile is built up automatically at one end by means of a slewing and luffing stacker using the cone-shell stacking method for 360 degrees of rotation, and reclaimed alternately at the other end by a radial scraper-type reclaimer. The latter reclaims the material layer by layer from the pile cross-section and conveys it into a central hopper located under the central column. If required, the rig can be designed to stack and reclaim simultaneously. PD100 - PYLON TYPE As on the Sandvik reclaimer the pylon-type stacker/reclaimer design represents consistent performance and combines a good ratio between machine weight and capacity. Very popular in low to medium bulk density applications and medium ore applications. PD200 - ROCKER TYPE Super-duty machine - minimizes the migration of the center of gravity in operation to allow very high capacities and an economic rail gauge, and to keep utilizable stockyard width at a maximum. The tripper car can be designed to be retractable to allow higher slew angles during reclaiming mode. PD200-2200/60, Abbot Point - Australia PD300-3500/100+120, Ho Ping Dome 1 & 2 - Taiwan PD300-4000/1500+120, Hsinta - Taiwan