Sandvik Tensioned PU Screening Media - Sandvik Mining and Sandvik Construction - #1

/ 2


catalogue search
Sandvik Tensioned PU Screening Media - Sandvik Mining and Sandvik Construction
P. 01
Sandvik Tensioned PU Screening Media - Sandvik Mining and Sandvik Construction
P. 02
Pages:
Sandvik Tensioned PU Screening Media - Sandvik Mining and Sandvik Construction


See other catalogues for Sandvik Mining and Sandvik Construction

Text version of the page
L_111259.qxd table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:8.00pt "Arial", sans-serif; } .font1 { font:19.00pt "Arial", sans-serif; } Sandvik >ned PU Screening Media polyurethane screening media with moulded holes primarily for fine to medium coarse screening in wet applications. Sandvik tensioned PU screening media is tailor-made to suit the application It is intended for installation in screens with cambered screen decks complete with support bars. The support bars are protected with capping rubber available in several sizes. For wide screens, centre hold down bars are recommended to pre-vent the media from flapping. Sandvik tensioned PU screening media is avail-able in a variety of widths, lengths and thicknesses. Moulded apertures for more accurate screening A large selection of square and slotted apertures is available. During the moulding process apertures are created using special moulds with release angles. When the hole pattern is designed, blank areas are left over the support bars. Hole patterns can also be tailored to fit a screen's special requirements - for example, with blank sections in areas with high localized wear. Long life and minimal maintenance requirements This product is made of hardwearing polyurethane specially designed to cope with the tough requirements imposed on screening cloth. Its high quality gives a long life resulting in long intervals between servicing and minimal maintenance requirements. The moulded holes and the flexi-bility of the polyurethane reduce the risk of pegging and blinding of the cloth, which gives further reduction of maintenance requirements. The cloth is reinforced with steel wires, resulting in a more secure fix-ing, minimal stretching and a reduced requirement of adjustment. Replaces wire mesh without modifications to the screen Sandvik tensioned PU screening media can be manufactured for both cross-wise and lengthways tensioned screens. It replaces wire cloth without modifi­cation of the screen. Reduced noise level and improved working environment By using polyurethane media on the screens, the noise level in the plant is reduced, improving the working environment. Sandvik tensioned PU cloths are easy to handle resulting in the reduced risk of accidental damage or injury during working.

pageCatalog pdf di En 2012-06-22-01