Sandvik Pre-tensioned Rubber Screen Panel - Sandvik Mining and Sandvik Construction - #1

Text version of the page

L_111259.qxd table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:8.00pt "Arial", sans-serif; } .font1 { font:19.00pt "Arial", sans-serif; } Sandvik Pre-tensioned Rubber Screen Panel A pre-tensioned rubber screen panel, with punched holes, primarily for fine to medium coarse screening in dry applications. Suitable for cambered screen decks and trommel screens Sandvik pre-tensioned rubber screen­ing media is intended for installation in screens with cambered screen decks, equipped with support bars. The sup­port bars would be protected with capping rubber. Panels are secured using Sandvik hardwearing side secur-ing system. For wide screens, centre hold down bars are recommended to prevent the panel from flapping. The panel has a strong reinforcement con-sisting of a flat bar frame and a pre-tensioned fabric, giving it stability and eliminating the need for subsequent adjustment. The flat bar reinforcement of the panel enables it to be rolled to a radius, making it suitable for Trommel screens. Sandvik pre-tensioned rubber screen panels are tailor-made to suit the application It is a made to measure panel manu-factured in a number of lengths, widths and thicknesses. It is available with a variety of hole sizes. The apertures are punched for maximum flexibility. The location of the hole pattern can be tailored to suit the special require-ments of a particular screen - for ex­ample, with blank areas in areas of high local wear. The hole pattern is available in standard or close pitch depending on the requirement for optimum open area or maximum panel life. Long life and minimal maintenance requirements This type of screening media is made of hardwearing rubber specially pro- duced to cope with the tough require-ments imposed on screen panels. Its high quality gives a long life, long intervals between servicing and mini­mal maintenance requirements. Flexible rubber prevents pegging and blinding The flexibility of the rubber reduces the risk of pegging and blinding of the panel, which gives further reduction of maintenance requirements. Reduced noise level and improved working environment By mounting rubber panels on the screens, the noise level in the plant is reduced, improving the working envi­ronment. and reducing the risk of accidental damage or injury during working.