MEDIUM MACHINING OF NODULAR CAST IRON

ISO/ ANSI

High tensile, HB 250

MK

T-MAX P

WM – for productive medium turning

Double sided

Operations: Longitudinal turning and facing.

CNMG 12 04 08-WM

a p = 0.5 – 5.0 mm Components: Rigid shafts, axles, hubs, gears etc.
f n = 0.15 – 0.6 mm/r Advantages: Double conventional feed rates with the same surface finish or halved surface finish values for the same feed. Ideal when good surface finish is a priority.

CNMG 12 04 08-KM

Cutting depth a p = 0.2 – 6.0 mm f n = 0.15 – 0.5 mm/r a p

-KM

4.03.0 2.01.00.10.20.30.40.50.6 5.06.0 0.70.80.9 Operations: Longitudinal turning, facing and profiling.

-KM-WM

Components: Cast-iron components in general. Advantages: Reliable giving problem-free machining, finishing to light roughing.
f n

Feed Inserts for grey cast iron, see page 44.

First choice AVERAGE CONDITIONSGOOD CONDITIONSDIFFICULT CONDITIONS General purpose operations.Continuous cuts.Pre-machined or light cast skin.Interrupted cuts.Heavy cast skin. HIGH FEEDHIGH FEEDHIGH FEED

-WM / GC3210 -WM / GC3210 -WM / GC3215

NORMAL FEEDNORMAL FEEDNORMAL FEED

-NGA / CC6090 - KM / GC3215 -KM / GC3210

For best performance with ceramics use specially designed industrial tool holders. See main catalogue.

46