catalogue search
P. 01
P. 02
|
|
You may also be interested in
Ultrafiltration unit, Microfiltration unit, Separator, Centrifuge, Decanter
Text version of the page
CHIP PAC™ Batch-Type Centrifugal Chip Wringers CW 7 • CW 75 • CW 150 • CW 250 Disposing of métal chips contaminated with codants or oils is becoming increas-ingly difficult — and expensive. SANBORN CHIP PAC Centrifugal Chip Wringers elimi-nate thcse costs and liabilities by remov-ing residual fluid from chips produced by grindcrs, lathes, and other metalworking machines. SANBORN CHIP PAC Chip Wringers use centrifugal force generated by a rapidly spinning basket to effectively remove the liquid coating from chips and turnings. The resuit is clean, dry scrap métal of sale-ablo quality, and lully reusable oils and cool-ants. In fact, costs for new oil can be reduced by up to 90 percent. Each SANBORN CHIP PAC unit is con-structed of heavy-duty, arc-welded steel for reliable performance and minimal maintenance. One of our four models is certain to accommodate your operational requirements. fT SANBORN +0 CW 7: Designed for short runs, laboratory use, or small plated parts. Tabletop unit has a seven-pound capacity and requires only one square foot of space. CW 75: Offers a 75-pound capacity for moderate production. CW 150: A 150-pound capacity makes this model idéal loi médium- to hicjh volume manuf.if tiirincj levels. CW 250: SANBORN's high-capacity Chip Wringer accommodâtes as much as 250 pounds to meet the needs of high-volume opérations.