TS200
2Pages

{{requestButtons}}

Catalog excerpts

TS200 - 1

Static Pneumatic Tired Roller 10-15 tonne class static pneumatic tired roller for smooth finish and compaction on medium and large paving jobs. Best compaction quality and efficiency ◦ Nine pneumatic tires with uniform, high contact pressures and kneading effect achieve the target density. ◦ Zero side clearance provides a full view of the tire edges for easy rolling along curbs and near buildings. ◦ Tilting mechanism of the front wheels provides continuous contact at all times on uneven surfaces for uniform compaction and a smooth finish. ◦ Pressurized water sprinkler system is standard to minimize pickup of hot mix asphalt on HMA tires. Operators comfort ◦ Comfortable suspension seat is standard to improve operator comfort. awning is standard for easy transportation. ◦ Quiet and comfortable with low noise level. ◦ Fold-down High safety standards ◦ Five mirrors are standard safety equipment for good visibility. floor and hand rail around the operator station protect operator against falling or tripping hazards. Easy Maintenance ◦ Easy cleaning water tank with a large drain plug and sloped bottom. and release agent spray system (option) with anti-clog package, i.e., a plastic water tank, triple-protection filtration, etc., and with perfect draining winterization. ◦ Water filter is easily cleaned by turning the lever. No need to change filters. ◦ Easy-access lubrication device for the drive chain is standard. ◦ Water SERVICE HOTLINE Asphalt Roller

Open the catalog to page 1
TS200 - 2

TYPE MODEL  CHASSIS MODEL WEIGHTS Operating weight (with AWNING) without BALLAST kg (lb) with METAL BALLAST kg (lb) with WATER BALLAST kg (lb) with METAL & WATER BALLAST kg (lb) Load on front axle (with METAL & WATER BALLAST ) kg (lb) Load on rear axle (with METAL & WATER BALLAST ) kg (lb) PERFORMANCE No.of speeds km / h (mph) Speed range (Forward & Reverse) (1 / 2 / 3 / 4) Gradability % (°) Min. turn radius (outer) m (in) mm (in) DIMENSIONS Overall length Overall width mm (in) Overall height (with AWNING) mm (in) Wheelbase mm (in) Compaction width mm (in) Tire size × Number of tires (Front...

Open the catalog to page 2

All SAKAI HEAVY INDUSTRIES catalogs and technical brochures

  1. TS160

    2 Pages

  2. TZ701-1

    2 Pages

  3. SW200-TW200

    2 Pages

  4. SV620

    2 Pages

  5. CR271

    2 Pages

  6. Pf series

    2 Pages

  7. Rammer

    2 Pages

  8. Road Planer

    2 Pages