S6700 series datasheet - Saftty Electronic Technology - #1

/ 2


catalogue search
S6700 series datasheet - Saftty Electronic Technology
P. 01
S6700 series datasheet - Saftty Electronic Technology
P. 02
Pages:
S6700 series datasheet - Saftty Electronic Technology


See other catalogues for Saftty Electronic Technology

Text version of the page
ISAFTT YI loVERHEAT UNDER CONTROl J SAFTTY ELECTRONIC TECHNOLOGY S6700 SERIES THERMOSTAT The S6700 séries is a RoHS compilant , positive snap action, single pôle / single throw.sub-miniature bimetallic thermostat which provides accurate and reliable sensing and switching in a single device. The S6700 séries may be automatically placed and soldered onto PC boards with high speed automated. equipmenteliminating the need for the expensive hand placement and termination required today for most power supply thermostats The S6700 provides fast , positive response with excellent repeatability. The thermostat has a switch capability of up to 1 amp for 48 VDC or 120 VAC for 30,000 cycles, and achieves low-level switching down to 0.001A to 0.002A at 5 VCD for 100,000 cycles.Temperature is pre-set at the factory and is non-adjustable in the field. The S6700 séries is ideally suited for use on crowded PC boards.Typical uses include turning on an indicator light.sounding an audible alarm,switch on a control circuit to send a message to a display screen or even switching a circuit to shut down a system. Applications include power supplies, computers and computer peripherals.aircraft, automotive, médical devices and test equipment. SPECIFICATIONS Contact Résistance: 100milliohms max (before and after rated life) Contact Ratings: Long Term Exposure Limit: -55<C to 160^3 (-67°F to 320°F) Dielectric Strength: Nickel-plated copper bracket has 1480 VAC 60Hz, 1 second duration terminais to case. Laminated non-conductive bracket has 2000 VAC 60Hz, 1 second duration terminais to case. Insulation Résistance: 100 Mohms at 500 VDC Contact Bounce(make): 3milliseconds max Weight: Approximately 0.5 grams Solderability: Terminal material is selectively striped with electrolytic tin over nickel strike for improved solderability and RoHS compliance. CYCLES VOLTAGE AMPS(resisttve) 30,000 48VDC 1.0 30,000 120VAC 1.0 100,000 5VDC 0.020 100,000 5VDC 0.001 Contact Opérations: Either close on rise (make) or open on rise(break) Operating Température Range: 40^ to 120°C ( 104°F to 248°F) Standard Operating Température Tolérance: 5°C (9°F) nominal operating température settings in 5*0 incréments

pageCatalog pdf di En 2012-05-22-31