EURO Shelving
8Pages

{{requestButtons}}

Catalog excerpts

EURO Shelving - 2

EURO Shelving Louvred Panels To carry plastic containers and spigots. These panels are suitable for frame heights of 1800mm and 2100mm high and frame widths of 300mm, 400mm and 500mm. . Rear Cladding Made of sheet steel, perforated or unperforated or mesh and available for all frame sizes. Shelf Dividers (full height) Available in four different heights Garment hanging Single or double coat hangers (for frame depths up to 750 mm) with clips Plastic End Caps for Frame Uprights Cupboard Doors (full height) Perforated steel frames Cupboard Doors (part height) Floor Trim Shelf front Angled Bin...

Open the catalog to page 2
EURO Shelving - 3

lecnnik I euro Shelving EURO Shelving is a clip-together shelving system that can be used in an almost limitless variety of applications. It has a wide selection of standard parts that can be used in all branches of industry and commerce, whether a single bay is needed or a high-rise installation up to 15m. The concept and stability fulfil the high demands of the ISO 9001 standard, guaranteeing lasting quality whether EURO Shelving is used whether it be office shelving, high-rise racking, multi-tier storage platforms, narrow aisle installation or mobile shelving. In addition there is a wide...

Open the catalog to page 3
EURO Shelving - 4

Frames, shelves and accessories Frames Open frames Diagonally braced frames Frames with perforated panels Standard 0.75 mm steel gauge Clad frames Extra Heavy 1.2 mm gauge Foot Plates Standard / Heavy, single and double Foot plate sizes All single uprights = width 70mm, depth 76mm All double uprights = width 70mm, depth 110mm Extra Heavy, single and double Material - Standard/Heavy - Steel 2mm gauge, Extra Heavy - 2mm gauge with 4mm steel base plate Finish – galvanised and passivated Features – available for singe and double uprights Advantages – easy to install they offer lateral support...

Open the catalog to page 4
EURO Shelving - 5

Shelves Unpierced shelves, depths only 750mm and 900mm Pierced shelves, depths up to 600mm saar lagertechnik Shelf widths - 900, 1000 and 1200mm Specifications – Standard duty, Heavy duty and Extra Heavy duty Shelf locking clips Material - aluminium extrusion Benefits – makes shelves easily adjustable, forms shelves and frames into an integral unit and prevents accidental shelf dislodgement. Disc clamp brace Bolt for tensioning brace Back to back racking brace Features - clips into rear uprights and is tensioned by a tensioning bolt to provide rear bracing

Open the catalog to page 5
EURO Shelving - 6

Wide range of accessories makes EURO Shelving a multi-purpose storage system Upright caps Rear cladding kits solid filling strips Floor trim Features – locate in top of uprights to provide capping for safety and appearance. The upright caps are flush with top. For use on all perimeter uprights. Clad frames filling strips Features – clips, bolts or rivets to uprights to provide rear cladding. A clean joint between the steel cladding sheets is achieved by use of a steel filler strip. Supplied complete with all fixings. Finish – painted light grey Rolled edge ensures safety Floor trim Part...

Open the catalog to page 6
EURO Shelving - 7

Drawer kits Louvred panels Height - 100, 150 and 200mm Features – Telescopic slides dividers and liners available Benefits - 100% accessibility for small paarts storage in 600, 500 and 450mm wide bays Shelf infill panels Features – all panels manufactured from mild steel and painted light grey. Permit plastic containers to be located at ends of shelf runs. Rear mesh panel kits Features – fill gaps between backs of shelves in back to back and spine clad installations Benefits - secures small parts stored full height Door configurations part height Material - 50mm welded mesh (3mm diameter...

Open the catalog to page 7
EURO Shelving - 8

saar Head Office Saar Lagertechnik GmbH Wiesenweg 2b D-65812 Bad Soden am Taunus Branch Office Germany West Dipl.-Ing. Gereon Fleck TechnologiePark / Friedrich-Ebert-Strasse D-51429 Bergisch-Gladbach Branch Office Great Britain Chris Adams phone +44 (0) 1604 470297 mobile +44 (0) 7528 167687 email ca@saar-lagertechnik.com Branch Office Germany South and Austria Karl Huber Mildenbergstraße 2b/10 A-6900 Bregenz Branch Office Germany East Dieter Krailing Gewerbegebiet Zur Aue 1 D-99330 Crawinkel Central Warehouse Ulrich Ruf Gewerbegebiet Zur Aue 1 D-99330 Crawinkel

Open the catalog to page 8

All SAAR LAGERTECHNIK GmbH catalogs and technical brochures