Swirl Burner - SAACKE - #1

Environment-friendly due to low NOx technology

Extremely low CO emissions in all load ranges

Very short flame with complete burn-out (e.g. 2.4m with 8 MW)

Very stable flame without any support fuel

Modular construction for easy changing-over to other fuels

•

•

The SAACKE SSB burners are low NOx burners available in duoblock construction, i.e. burner and fan are installed at different locations. Basically, light fuel oil and heavy oilor gasmay be used as fuel, but even a combination of gas and oilis possible. In addition to that, the SSB burner is used for combustion of pulverised fuels or lean gases. The swirl burner consists of the following sub-assemblies:

o

TO

"co

Tangential wind box

Central fuel gun with nozzle and connecting hoses Combustion air control damper with actuator Core air control damper with actuator Combustion and core air pressure monitoring devices Flame scanner

Gas-electric or oil-electric ignition burner

tU

o

tu

tu m tu

SAACKE SSB burners are especially used for waste incineration plants, combustion chambers, and for special thermal process technology applications. In all cases, SAACKE may provide you with the individual burner as well as with complete firing plant. The most essential components of a SSB burner plant are the burner itself, the air guiding system including fan(s), the control and monitoring system, and the oil and compressed air / steam valves and fittings.

I

-Q

E CD

LU

O co

o o

<

SAACKE GmbH • Sudweststrasse 13 • 28237 Bremen • Germany Phone: +49 - 421- 64 95 0 • Fax: +49 - 421- 64 95 224 • E-Mail: info@saacke.de • www.saacke.com