Group: Hersteller von Bohr- und Senkwerkzeugen
Catalog excerpts
CORE DRILLING TECHNOLOGY CATALOGUE
Open the catalog to page 1The new RUKO core drilling machines Accessories from page 12
Open the catalog to page 2RUKO CORE DRILLING The RUKO core drilling machine RU40 - Technical features. Standard fine adjustment stabilised Displaceability: ± 10 mm Pivoting range: ± 30° The RUKO fine adjustment enables repositioning with fixed magnets. Better handling due to ergonomic carrying handle. Coolant bottle with intelligent coolant supply. Magnet with 20.000 N clamping force and larger contact surface.
Open the catalog to page 3RU 40 • 20.000 N clamping force • Height-adjustable power unit with double dovetail guide • Right-/ left-handed rotation • 4-speed gearbox • Speed controller • High-performance motor • Standard fine adjustment stabilised Displaceability: ± 10 mm Pivoting range: ± 30° Magnetic clamping force: 20.000 N Total Power consumption: 1.800 Watt Adapter: Morse taper MT 3 Input voltage: 220 - 240 Volt Plastic tool case Allen key 2.5 / 6 Safety belt Drill chuck Ø 1,0 - 16,0 mm MT 3 arbor holder Coolant bottle High performance cutting oil spray Operating instructions Cutting depth core d
Open the catalog to page 4Use of accessories for core drilling machine RU40 Sleeve to reduce MT 3 down to MT 2 Art. no. 108 125 Arbor holder EasyLock MT 3 Art. no. 108 313 Arbor holder EasyLock Art. no. 108 312 Weldon threaded retainer Thread tap quick-change insert with and without safety coupling Thread tap quick-acting holder MT 3 Art. no. 108 160 threaded retainer
Open the catalog to page 5RU 25 • 16.000 N clamping force • Height-adjustable power unit with double dovetail guide • Right-/ left-handed rotation • 2-speed gearbox • Speed controller • High-performance motor • Light and handy Magnetic clamping force: 16.000 N Total Power consumption: 1.200 Watt Adapter: Morse taper MT 2 Input voltage: 220 - 240 Volt Plastic tool case Allen key 2.5 / 6 Safety belt Drill chuck Ø 1,0 - 16,0 mm MT 2 arbor holder Coolant bottle High performance cutting oil spray Operating instructions Cutting depth core drill
Open the catalog to page 6Use of accessories for core drilling machine RU25 threaded retainer Thread tap quick-acting holder MT 2 Art. no. 108 163 Thread tap quick-change insert with and without safety coupling Arbor holder EasyLock Art. no. 108 312 threaded retainer
Open the catalog to page 7• 10.000 N clamping force • Height-adjustable power unit with double dovetail guide • Very light / easy to use • Automatic coolant supply • Easy readjustment thanks to 50% reduction in magnetic power when the motor is switched off Technical data: Core drills: 0 12,0 - 35,0 mm Cutting depth core drills: up to 50,0 mm Input voltage: 220 - 240 Volt Accessories: 1 Plastic tool case 1 Arbor holder Weldon 1 Safety belt 3 Allen key 2.5 / 4 / 6 1 Coolant bottle 1 Operating instructions
Open the catalog to page 8Use of accessories for core drilling machine A10 threaded retainer
Open the catalog to page 9Comparison of technical data
Open the catalog to page 10Plastic tool case Plastic tool case Arbor holder Weldon Safety belt Safety belt Coolant bottle Coolant bottle High performance cutting oil spray Operating inst
Open the catalog to page 11Automatic EasyLock Quick-IN arbor for core drills with Weldon shank (3/4") The EasyLock quick-in arbor enables a very quick tool change without additional tools. Can be operated with one hand. Packing unit: individual carton Core drilling 0 Core drills EasyLock with MT 2 shank (Art. no. 108 312-1) and cooling bottle ( Article no. 108 101) EasyLock with MT 2 shank EasyLock with MT 3 shank (Art. no. 108 313-1) and cooling bottle ( Article no. 108 101) EasyLock with MT 3 shank 1. Push the ring spanner up until it sits tight. 2. Insert the core drill in the EasyLock. This locks in with a loud...
Open the catalog to page 12Arbor holders for core drills with Weldon shank (3/4“) Packing unit: individual carton Core drilling machine Core drilling machine Arbor holder with MT 2 shank (Art. no. 108 302-1) and cooling bottle (Art. no. 108 101) Arbor holder with MT 2 shank Arbor holder with MT 3 shank (Art. no. 108 303-1) and cooling bottle (Art. no. 108 101) Arbor holder with MT 3 shank Arbor holders for core drills with threaded retainer M18 x 6 P1,5 Packing unit: individual carton Arbor holder with MT 2 shank (No.108 102-1) including cooling bottle (Art. no.108 101) adapter (Art. no.108 108) and ejector pin (Art....
Open the catalog to page 13Arbor holders and quick-change inserts for core drilling machines Packing unit: individual plastic pack Quick-acting holder with MT 3 shank and +/-10,0 mm length compensation for thread taps Morse taper no. 3 arbor holder for M 27 thread taps Morse taper no. 3 arbor holder for M 30 thread taps Quick-change insert „with" safety coupling Quick-change insert „without" safety coupling For thread tap 0-shank mm Article no. .with" safety coupling Article no. .without" safety coupling Overview of thread tap shaft diameters 0-shank mm
Open the catalog to page 14General information: 1. Push the quick-release slot holder from below upwards into the slot until it is seated firmly. 2. Open the slot holder by pushing the locking ring upwards. 3. Insert the quick change unit into the quick-release slot holder. This is locked in with a loud „click“. The lock ring snaps down. 4. The machine threaded drill can be inserted easily into the quick-change unit. 5. The machine is now ready for use.
Open the catalog to page 15Packing unit: individual plastic pack Core drilling machine Adapter with Weldon shank 3/4” for core drills with thread retainer M18 x 6 P1,5 Adapter with Weldon shank 3/4” for core drills with Quick IN-shank Adapter with Quick IN-shank with Quick IN- 108 111 1 for core drills with thread retainer M18 x 6 P1,5 retainer Adapter with Quick IN-shank for core drills with Weldon shank 3/4” Adapter with Weldon shank 3/4” for core drills with Nitto shank with Quick INretainer Drill chuck with thread retainer 1/2” UNF for clamp field 0 1,0 - 13,0 mm Drill chuck with B16 cone for clamp field 0 3,0 -...
Open the catalog to page 17E Adapter for thread taps with Weldon shank (3/4") in core drilling machines RU25 and RU40 Packing unit: individual plastic pack Thread tap For thread tap Square Magnetic chip lifter The RUKO magnetic chip lifter attracts metal chips thanks to its strong magnet. Pulling back the magnet into its housing simply allows the chips to drop off again. Ideal for removing the chips on core drilling machines and difficult to reach areas. Packing unit: individual plastic pack Coolants and lubricants RUKO high performance coolants and lubricants with outstanding cooling and anti-separation qualities....
Open the catalog to page 18All RUKO GmbH Präzisionswerkzeuge catalogs and technical brochures
-
Thread cutting tools
46 Pages
-
Special drills
8 Pages
-
Concrete drills
16 Pages
-
Tube and sheet drills
6 Pages
-
Screw hole punches
10 Pages
-
Deburring program
8 Pages
-
Step drills
18 Pages
-
Hole saws
12 Pages
-
Rotary burrs
18 Pages
-
Core drills
22 Pages
-
Saw program
28 Pages
-
RUKO Catalogue
324 Pages
-
Thread repair tool
6 Pages
-
Coolants and lubricants
2 Pages
-
Screw hole punches
10 Pages
-
TUBE AND SHEET DRILLS
6 Pages
-
SPECIAL DRILLS
8 Pages
-
Twist drills
62 Pages
-
PRECISION TOOLS CaTaLOguE
324 Pages
-
RUKO DISPLAY catalogue
58 Pages
-
The RUKO pneumatic tools
16 Pages
-
RUKO oil change program
20 Pages