Group: Hersteller von Bohr- und Senkwerkzeugen
Catalog excerpts
CONCRETE DRILLS FASCINATION ffl: PRECISION®
Open the catalog to page 1Drilling depth Point angle Cutting edges right hand cutting Range and applications overview: Explanation of symbols from page
Open the catalog to page 2Main application Other application Non-ferrous metals Concrete reinforcement Lightweight material
Open the catalog to page 34 -. jM SDS-plus hammer drills Longer service life in concrete and reinforcement thanks to the stabilised head geometry and rounded cutting edges. Patented double-edge cutting design according to the bionic principle. Innovative Twinmax 3D spiral profile provides the ideal removal of drill dust. Certified by the Pruf-gemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the Deutsches Institut fur Bautechnik. (DiBt). Fields of application: for granite, concrete, concrete reinforcement, clinker, stone, brickwork and marble. In all hammer drills with SDS-plus adaptor and...
Open the catalog to page 4SDS-plus hammer drills 0 mm * Please note when using these bits it is recommended to pre-drill with a shorter hammer drill of a same diameter. SDS-plus hammer drill sets Fields of application: for granite, concrete, concrete reinforcement, clinker, stone, brickwork and marble. In all hammer drills with SDS-plus adaptor and 2-groove adaptor such as Hilti TE 10-22. 7-piece set of SDS-plus hammer drills 205 246 in steel case 0 5,0 - 6,0 - 8,0 x 110,0 mm and 0 6,0 - 8,0 - 10,0 - 12,0 x 160,0 mm 7-piece set of SDS-plus hammer drills 205 246 RO
Open the catalog to page 5SDS-plus hammer drills with 3 cutters Impeller cutting edge with 3 blades for more effective material removal; increased power transmission thanks to shaft-form head design; extremely long service life thanks to extremely wear-resistant single-phase tungsten carbide alloy; stable head geometry due to embedded tungsten carbide head; optimised low-vibration triple spiral; DuraTec hardening technique; certified by the Prufgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the Deutsches In-stitut fur Bautechnik. (DIBt). Fields of application: for granite, concrete, clinker,...
Open the catalog to page 6SDS-plus hammer drill sets with 3 cutters Article no. 7-piece set of SDS-plus hammer drills 213 246 in steel case 0 5,0 - 6,0 - 8,0 x 110,0 mm and 0 6,0 - 8,0 - 10,0 - 12,0 x 160,0 mm 77-piece set of SDS-plus hammer drills 213 246 RO
Open the catalog to page 7Concrete drills with carbide cutting edge and straight shank Long service life due to ideal tungsten carbide geometry with large carbide tip angle; wide Twin-max-G2 spirals; special surface hardening technique by blasting guarantees extreme breaking strength. Fields of application: for granite, concrete, clinker, stone, brickwork, wall tiles and marble. Application: in light hammer drills and strong impact drills with chuck adaptor. Packing unit: Art-. No. 221... in plastic bags of 1 Art-. No. 221... K in plastic box Concrete drill sets with carbide cutting edge and straight shank Article...
Open the catalog to page 8Percussion drill made from premium coated special steel with high tenacity. Very good drilling properties even in high stress applications. Special tungsten carbide tips for multiple hard material drilling. Applications: rotary drilling in concrete, clinker, stone and general masonry. Suitable for impact drilling machines with 3 jaw chuck. Packing unit: Art-. No. 209... in plastic bags of 1 Art-. No. 209... K in plastic box Percussion drill set with carbide cutting edge and straight shank Article no. 7-piece set of percussion drills with carbide cutting edge 205 256 and straight shank in...
Open the catalog to page 9Masonry drills extra long with carbide cutting edge Masonry drill made from premium coated special steel with high tenacity. Very good drilling properties even in high stress applications. Well suited for deep hole drilling in various masonry materials. Special tungsten carbide tips for multiple hard material drilling. Packing unit: in plastic bags of 1 SDS-plus concrete hammer drills with 3 cutters 3D cutting edge profile in Y-shape for exact positioning and ideal starting; long service life and low probability of breakage, even on impact with reinforcements thanks to the highly effective...
Open the catalog to page 10SDS-max concrete hammer drills 3D cutting edge profile in Y-shape for exact positioning and ideal starting; long service life and low probability of breakage, even on impact with reinforcements thanks to the highly effective technique of hardening by blasting; high drilling speed due to wide Twinmax spirals; vibration-optimised drilling performance; certified by the Prufgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the Deutsches Institut fur Bautechnik. (DIBt). Packaging: in plastic bags of 1 each Please note when using these bits it is recommended to pre-drill with...
Open the catalog to page 11Universal drills with carbide cutting edge and straight shank Special alloyed steel construction provides extended tool life. Special tungsten carbide tip with centre point design enables precise drilling and non-splintering on hard masonry materials. Applications: for drilling in tiles, clinker, stone, general masonry, plastics, non-ferrous metals, soft and hardwood and lightweight construction materials. Only recommended for use in percussion drilling machines. Packing unit: in plastic bags of 1 Glass and tile drills with carbide cutting edge and straight shank Suitable for drilling glass...
Open the catalog to page 12Hammer percussion drill bits with carbide cutting edges Suitable for drilling larger diameter holes in masonry materials. Thin wall body can drill concrete, stone, general masonry including bricks. Suits hammer drills up to 4,0 Kg with an SDS-plus adaptor. Can also be used in impact drilling machines which can hold a hexagon shank (3 jaw chuck). 0 50,0 mm diameter drills require min. 600 watt machine. Larger drill diameters -up to 0 65,0mm will require a more powerful machine with at least 800 watt. Supplied without centre drill and arbor adaptor. Cutting edge: Tip fitment: Adaptor: special...
Open the catalog to page 13SDS-plus and SDS-max chisels Impact resistant chisel, forged in a single piece, with high surface hardness for long life. Special design enables maximum energy transmission for maximum cutting action to chisel edge. Packaging: in plastic bags of 1 each Material: high-quality special steel Surface: heat treated to provide hardness and durability Applications: for chiselling in concrete, general masonry including bricks, stone etc. Suitable for use in all hammer drills with SDS-plus/SDS – max adaptors and 2-groove adaptor with rotating stop. Use eye protection. SDS-plus chisels Length L1 mm...
Open the catalog to page 14All RUKO GmbH Präzisionswerkzeuge catalogs and technical brochures
-
Thread cutting tools
46 Pages
-
Special drills
8 Pages
-
Tube and sheet drills
6 Pages
-
Screw hole punches
10 Pages
-
Deburring program
8 Pages
-
Step drills
18 Pages
-
Hole saws
12 Pages
-
Rotary burrs
18 Pages
-
Core drills
22 Pages
-
Saw program
28 Pages
-
RUKO Catalogue
324 Pages
-
Core drilling technology
40 Pages
-
Thread repair tool
6 Pages
-
Coolants and lubricants
2 Pages
-
Screw hole punches
10 Pages
-
TUBE AND SHEET DRILLS
6 Pages
-
SPECIAL DRILLS
8 Pages
-
Twist drills
62 Pages
-
PRECISION TOOLS CaTaLOguE
324 Pages
-
RUKO DISPLAY catalogue
58 Pages
-
The RUKO pneumatic tools
16 Pages
-
RUKO oil change program
20 Pages