RuggedRouter RX1000 - RuggedCom - #10

/ 10


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
Pages:


See other catalogues for RuggedCom

Text version of the page
RUGGEDCOM* RuggedRouter™ RX1000
industrial strength networks- Industrially Hardened Cyber Security Appliance
Order Codes
RX1000 -__-__-_ -__-__-__-__-__-__-__
Main Mount PS1 PS2 S1 S2 S3 S4 S5 S6
S2: Modules for Slot 2
■ XX =■Im1
Empty
■■ V90 Modem
S1
S3
S5
S6
S2
S4
S3 and S4: Ethernet Modules for Slots 3 and 4 ■IxXXX = Empty
■ItX01 = 2 x 10/100Tx RJ45
■|fX01 = 2 x 100FX - Multimode, 1300nm, ST connectors ■IfX02 = 2 x 100FX - Multimode, 1300nm, SC connectors ■IfX11 = 2 x 100FX - Multimode, 1300nm, LC connectors ■IfX03 = 2 x 100FX - Multimode, 1300nm, MTRJ connectors ■IfX04 = 2 x 100FX - Singlemode, 1300nm, ST connectors, 20km ■IfX05 = 2 x 100FX - Singlemode, 1300nm, SC connectors, 20km ■IfX06 = 2 x 100FX - Singlemode, 1300nm, LC connectors, 20km ■IfX07 = 2 x 100FX - Singlemode, 1300nm, SC connectors, 50km ■IfX08 = 2 x 100FX - Singlemode, 1300nm, LC connectors, 50km ■IfX09 = 2 x 100FX - Singlemode, 1300nm, SC connectors, 90km ■IfX10 = 2 x 100FX - Singlemode, 1300nm, LC connectors, 90km
S5 and S6: RX1000 Modules for Slots 5 and 6 ■IxXX = Empty
■ItC1 = Single T1/E1 Channelized/Unchannelized ■ItC2 = Dual T1/E1 Channelized/Unchannelized ■ItC4 = Quad T1/E1 Channelized/Unchannelized ■IdS3 = Clear Channel T3 DS3 card ■Id01 = DSL
■Id02 = 56 kBbps DDS DSU/CSU (1)
■ TS1 = Precision Time Protocal (PTP) Card: GPS, NTP, IRIG-B,
IEEE188 Time Synchronization (2)
■ S01 = 4 x RS232/RS422/RS485 via RJ45
NOTES:
This module has an operating temperature range of -40°C to +50°C.
Only one (1) GPS card can be configured per router; see PTP card datasheet for more information.
Main: Ethernet and Power Connectors
■ R = Ethernet on rear; LED panel on front; power connector on rear ■JF = Ethernet on front; LED panel on front; power connector on rear ■Iß = Ethernet on rear; LED panel on top; power connector on rear
■It = Ethernet on front; LED panel on top; power connector
• on rear
Mount: Mounting Options
■IrM = 19" Rack Mount Kit
■IdP = DIN and Panel Mount Kit
■IrD = 19" Rack, DIN, and Panel Mount Kit
■|00 = No Mounting Option
PS1 and PS2: Power Supply 1 and Redundant Power Supply
■|24 = 24VDC (9-36VDC), screw terminal block ■|48 = 48VDC (36-59VDC), screw terminal block ■IhI = 88-300VDC or 85-264VAC, screw terminal block ■|24P = 24VDC (9-36VDC), pluggable terminal block ■|48P = 48VDC (36-59VDC), pluggable terminal block ■IhIP = 88-300VDC or 85-264VAC, pluggable terminal block ■I00 = No Power Supply (PS2 Only)
S1 : Modules for Slot 1 ■ XX = Empty
Example Order Codes
RX1000-R-RM-24-00-XX-XX-TX01-TX01-TC2-XXX
19" Rack mounted, single 24VDC power supply, 4 10/100 RJ45 Ethernet ports, Dual T1 WAN interface, with Ethernet ports on the rear
RX1000-F-RM-48-48-XX-XX-FL01-FX02-TC4-XXX
19" Rack mounted, dual redundant 48VDC power supply, 2 FL01 Multimode 850nm Fiber and 2 FX02 Singlemode 1300nm Fiber Ethernet ports, Quad T1 WAN interface, with Ethernet ports on the front
RuggedCom Inc. 30 Whitmore Road
W
VVUUUUMUye, WllldllU, OclllclUcl L4L I
Tel: (905) 856-5288 Fax: (905) 856-1995 Toll Free: (888) 264-0006
Technical Support Center: (866) 922-7975 or (954) 922-7975
RX1000-R-RM-24-HI-XX-XX-TX01-FX05-TC4-XXX
19" Rack mounted, dual redundant power supply (mixed voltage), 2 10/100 RJ45 and 2 1300nm Singlemode Fiber Ethernet ports, Quad T1 WAN interface, with Ethernet ports on the rear
© 2008 RuggedCom Inc.
RuggedSwitch is a trademark of RuggedCom Inc. Ethernet is a trademark of the Xerox Corporation. Patent Pending
All specifications in this document are subject to change without notice. Rev 2-S
For additional information on our products and
services, please visit our website at: www.ruggedcom.com
Accessories
Cable support brackets (two) ■ Power cable (North America three prong connector -> beau)
42-11-0021 43-10-0007
www.RuggedCom.com
RuggedRouter™ RX1000
10

pageCatalog pdf di En 2012-06-22-01