Rotary tables for horizontal and vertical machining centers - Rückle - #1

Text version of the page

Type / Designation MRT 160 MRT 200 MRT 250 MRT 320 MRT 400 Table sizes mm 320 | 380 380 | 460 460 | 550 520 | 630 630 | 800 Load capacity, vertical rotation axis kg 600 800 1,000 3,500 4,500 Load capacity, horizontal rotation axis 1 kg 300 400 500 1,750 2,250 Anti-friction mounting Bearing diameter mm 200 250 320 400 460 Safe max. tilting moment up to Nm 1,500 4,000 6,000 12,000 18,000 Drive 2 Max. speed S6 up to RPM 30 20 20 15 15 Max. torque S6 up to Nm 580 900 1,800 2,700 3,500 Nominal speed up to RPM 400 200 100 100 75 Nominal torque up to Nm 120 320 720 1,300 2,000 Max. speed up to RPM 800 400 200 200 150 Locking system Tangential moment up to Nm 1,000 1,700 2,800 3,500 5,500 Accuracy Dividing accuracy 3 arcsec +/- 2 +/- 2 +/- 2 +/- 2 +/- 2 Lateral runout mm 0.01 0.01 0.01 0.01 0.015 Circular runout 4 mm 0.01 0.01 0.01 0.01 0.01 Type / Designation MRT 500 MRT 650 MRT 800 MRT 1000 MRT 1250 Table sizes mm 650 | 800 | 1,000 1,000 | 1,200 | 1,400 1,200 | 1,400 | 1,600 1,400 | 1,600 | 1,800 1,600 | 2,000 | 2,500 Load capacity, vertical rotation axis kg 6,000 10,000 15,000 25,000 35,000 | — Load capacity, horizontal rotation axis 1 kg 3,000 5,000 7,500 12,500 17,500 | — Anti-friction mounting Bearing diameter mm 540 670 760 980 1,250 Safe max. tilting moment up to Nm 28,000 40,000 60,000 90,000 120,000 | — Drive 2 Max. speed S6 up to RPM 15 10 8 7 6 Max. torque S6 up to Nm 4,000 8,000 10,500 13,500 15,500 Nominal speed up to RPM 40 40 20 10 — Nominal torque up to Nm 3,000 3,000 6,500 10,000 — Max. speed up to RPM 75 75 40 20 — Locking system Tangential moment up to Nm 12,000 20,000 25,000 30,000 35,000 | — Accuracy Dividing accuracy 3 arcsec +/- 2 +/- 2 +/- 2 +/- 2 +/- 2 | — Lateral runout mm 0.02 0.02 0.02 0.025 0.03 | — Circular runout 4 mm 0.01 0.01 0.01 0.01 0.01 | — MRT 1250 Datasheet by drive t the same value for both drive systems t worm gear t torque motor Milling Rotary Table Milling table up to size 1250 1 Load capacity without counter-bearing 2 Drive data are not associated one with another; they will be customized according to the application. 3 Depending on the measuring system 4 Hub centering Further information and customized modifications on request. Technical data are subject to change. Milling Rotary tables for horizontal and vertical machining centers