Ω +1000 Ω (Li/Ri = 61.5µH/ Ω ) Safety Parameters24V Version12V Version Ui = 28vUi = 15.7V
Ii = 28mAIi - 37mA
Pi = 0.81WPi = 0.56W
Ci=0Ci = 0
Li = 20mHLi = 20mH + 325 Construction ABS enclosure with encapsulated
electronic module. Colour – red Connections Six terminals suitable for cable up to
2.5mm Location
Specification
Certification ATEX certified to EN50014:1997,
EN50020:1994 and EN50284:1999
Group II, Category 1G, EEx ia T4 (Ta -20ºC to +55ºC) Zones 0, 1 or 2. Gas Group, IIC, IIB or
IIA, Temp Class up to T4 Certificate No. BAS00ATEX1259 EMC Compliance Sound Supply Immunity to EN61000-6-2:2001
Emissions to EN61000-6-4:2001 Weight 26 user selectable tones, see table
below for tone types and related
volumes. The volume can be adjusted
via a single turn potentiometer by 15dB.
Toobtain the second tone, the negative
supply is switched to a third terminal
marked “2nd sound”. 12 or 24VDC ±20%, depending on
model, current 14mA @ 24V,12mA @ 12V 300g
2 Having a deep base and two terminals per
input makes these units convenient for
looping to other circuits or for siting ‘end-
of-line’ resistors. The base has three
knock-outs, two on the side and one on
the base, to accommodate PG13.5/20mm
conduit or cable glands. The units are
polarised and a chain may be fitted with
an ‘end-of-line’ resistor for reverse polarity
testing and to permit line monitoring. Installation Details Please refer to to EC Type ExaminationCertificate and related System Certificate
for full details on suitable interface devices. Recommended Interfaces Zener Barriers: S951 (24V version), S931 (12V version)
IS Isolators: WIS1211 (24V version) Environment Operating temperature:0 to 55ºC
Storage temperature:-20 to 80ºC
Humidity:0-95% RH, non condensing Protection IP65
Terminals COMMON28VDC.MAX1st SOUND2nd SOUND Tone and Sound Levels with ISInterface
––––++ NoTones2ndSwitchSoundLevel
––––++ ToneCodeTypedBA 1
Alternating 800/970Hz at 0.25s141111188 >
Tone SelectionDIP Switch 2
Sweeping 800–970Hz at 7Hz1411110 Fast Sweep (LF) 91 >
93
50 VolumeControl 3
Sweeping 800–970Hz at 1Hz1411101 Med Sweep (LF) 94 >
4
Continuous at 2850Hz1411100102 >
5
Sweeping 2400–2850Hz at 7Hz411011 Fast Sweep 100 >
55 6
Sweeping 2400–2850Hz at 1Hz411010103 >
60 7
Slow Whoop1411001 Slow Sweep 94 >
8
Sweeping 1200–500Hz at 1Hz141100091 >
48Two entries forcable glands on sides
and one on base 9
Alternating 2400/2850Hz at 2Hz410111100 >
10
Intermittent 970Hz at 1Hz1410110 Back-up Alarm (LF) 83 >
21 11
Alternating 800/970Hz at 7/8Hz141010187 >
12
Intermittent 2850Hz at 1Hz410100 Back-up Alarm (HF) 100 >
13
970Hz at 0.25s on, 1s off141001183 >
14
Continuous 970Hz41001085 >
Approvals
15
554Hz for 100ms, 440Hz for 400ms1410001French fire91 >
16
Intermittent 660Hz: 150ms on, 150ms off1410000Swedish fire86 >
Country &StandardCertificateApproved 17
Intermittent 660Hz: 1.8s on, 1.8s off1401111Swedish fire87 >
Authoritynumberfor 18
Intermittent 660Hz: 6.5s on, 13s off1401110Swedish fire88 >
Europe
EN50014, EN50020BAS00ATEX1259EX II 1G >
19
Continuous 660Hz1401101Swedish fire87 Baseefaand EN50284EEx ia IIC T4 >
20
Alternating 554/440Hz at 1Hz1401100Swedish fire93 >
Europe
EN50014, EN50020MECSO1ATEX4260Ex I 1M >
21
Intermittent 660Hz at 7/8Hz1401011Swedish fire88 MECS Miningand EN50303EEx ia I >
22
Intermittent 2850Hz: 150ms on, 100ms off1401010Pelican Crossing100 >
Canada
C22.2 Nos 0, 0.479122Class 1 Groups >
23
Sweeping 800–970Hz at 50Hz1401001Low buzz92 CSA0.5, 25, 30, 205A, B, C and D >
24
Sweeping 2400–2850Hz at 50Hz1401000High buzz99 USA J. I. 3008604Class1 Div1 FM >
25
3970Hz pulses, 0.5s on/0.5s off, 1.5s off140011183 FMGroups A, B >
26
32850Hz pulses, 0.5s on/0.5s off, 1.5s off1400110102 >
Due to our policy of continuous product development, we reserve the right to amend specifications without notice.
Doc DB5-0 5
YEAR RTK Instruments Limited St James Business Park,
Knaresborough, North Yorkshire,
England. HG5 8PJTelephone: +44 (0)1423 580500Facsimile:+44 (0)1423 580501
Web: www.rtkinstruments.com
Email: enquiry@rtkinstruments.com >
GUARANTEE FM14290ISO9001:2000