standard specification
International - NonHazardous
IQT Range Flyer (E115) - 31135 Range
Mechanical
WT: Standard watertight,BS EN 60529 :1992, IP68, 7 metres/72 hrs.
quarter-turn electric valve
IQT
European - Hazardous Area EExd IIC T4. ATEX (94/9/EC) II 2GD:
intelligent technology actuators
EExd IIB T4. ATEX (94/9/EC) II 2GD: CENELEC Norm EN50014 and EN50018.
Temperature -20°C to +70°C (-4°F to +158°F). CENELEC Norm EN50014 and EN50018.
Temperature -20°C to +70°C (-4°F to +158°F).
*Option -30°C to +70°C (-22°F to +158°F).
*Option -40°C to +70°C (-40°F to +158°F).
*Option -50°C to +40°C (-58°F to +104°F). EExde IIB T4. ATEX (94/9/EC) II 2GD: Temperature -30°C to +70°C (-22°F to +158°F). Uninterruptable power supplies *Option -40°C to +70°C (-40°F to +158°F).
*Option -50°C to +40°C (-58°F to +104°F). Power supply options US - Non Hazardous Standard
actuators can be operated on UPSsystems providing the above specified
tolerances are not exceeded and waveforms,
harmonics, spikes etc. adhere to recognised
supply standards such as EN50160. For more
information refer to publication E130E. IQT single phase IQT DC NEMA 4, 4X and 6: Available for standard single-phase voltages:
50Hz: 110, 115, 120, 220, 230 and 240 volts
60Hz: 100, 110, 115, 120, 208, 220, 230 and
240 volts Available for the following DC supplies:
IQT: 24 volts Non-standard voltages Actuators can be supplied to operate on
power supply voltages other than those
quoted above. Please apply to Rotork. Non standard tolerances Temperature -30°C to +70°C (-22°F to +158°F). Where voltage and/or frequency variations
may be experienced outside those quoted
above, or where operation under large volt
drop conditions may be required please apply
to Rotork. *Option -40°C to +70°C (-40°F to +158°F).*Option -50°C to +40°C (-58°F to +104°F). CENELEC Norm EN50014, EN50018 and EN50019. Temperature -20°C to +70°C (-4°F to +158°F).*Option -30°C to +70°C (-22°F to +158°F).
*Option -40°C to +70°C (-40°F to +158°F).
*Option -50°C to +40°C (-58°F to +104°F). EExde IIC T4. ATEX (94/9/EC) II 2GD: Canada - Non Hazardous CSA WT: Canadian Standard Association -Watertight. Wiring and components
complying with CSA Enclosure 4 and 4X: International - Hazardous Area Temperature -30°C to +70°C (-22°F to +158°F). CENELEC Norm EN50014, EN50018 and EN50019. *Option -40°C to +70°C (-40°F to +158°F).
*Option -50°C to +40°C (-58°F to +104°F). Temperature -20°C to +70°C (-4°F to +158°F). IEC. Exd IIB T4: IEC60079-0 and IEC60079-1 for Exd IIB T4.
Temperature -20°C to +60°C (-4°F to +140°F). Rotork can supply
actuators to nationalstandards not listed above. For details
please contact Rotork. IEC. Exd IIC T4: IEC60079-0 and IEC60079-1 for Exd IIC T4.
Temperature -20°C to 60°C (-4°F to +140°F). USA - Hazardous Area FM. Class 1, Division 1, Groups C, D, E, F, Ghazardous areas:
Electrical
IQT
actuators are suitable for operation with
the following three phase, three wire power
supplies: 50Hz Power supplies 200, 220, 240, 380, 400, 415, 440, 480, 500,
550, 660 and 690 volts 60Hz 200, 208, 220, 230, 240, 380, 400, 440, 460,
480, 575, 590, 600, 660 and 690 voltsThe required nominal operating voltage mustbe specified at time of order.Actuator performance is guaranteed with avoltage tolerance +/-10% and frequency
tolerance +/-5Hz. Actuators are capable of
starting and running up to speed with a
maximum 15% volt drop. Factory Mutual - Explosionproof to NEC Article 500. Temperature -30°C to +60°C (-22°F to +140°F). Canada - Hazardous Area *Option -40°C to + 60°C (-40°F to +40°F).
*Option -50°C to +40°C (-58°F to +104°F).
*Alternative for Group B hazardous area.
Temperatures as for Groups C and D. CSA EP. Class 1, Division 1, Groups C and Dhazardous areas: Canadian Standard Association - Explosionproof. Temperature -30°C to +70°C (-22°F to +158°F). *Option -50°C to +40°C (-58°F to +104°F).
*Alternative for Group B hazardous area.
Temperatures as for Groups C and D.
UK head office USA head office tel Rochester (585) 328 1550 Rotork Controls Limited Rotork Controls Inc fax (585) 328 5848 tel Bath 01225 733200 email info@rotork.com fax 01225 333467 Rotork Controls Inc, Rochester, USA email mail@rotork.co.uk Rotork Controls Ltd, Bath, UK
www.rotork.com A full listing of our worldwidesales and service network
is available on our website at
As part of a process of on-going productdevelopment, Rotork reserves the right
to amend and change specifications
without prior notice.Published data may be subject to change.
For the very latest version release, visitour website at www.rotork.comThe name Rotork is a registered trademark.Rotork recognises all registered trademarks.
Published and produced in the UK by
Rotork Controls Limited.
