| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | 5 | | |
| | | | | |
| | | |
| | | |
| | | The system has the capability to increment to extremely fine levels. The Heidenham/Renishaw angular encoder couples directly to the motor control system, which has its own high-rpsnintion interpolator. The system ensures high motor stiffness, precise positioning and repeatability. | | |
| | | |
| | | Specification Model | | |
| | | APSOO | | |
| | | |
| | | |
| | | Platen diameter Base diameter Overall Height Unit Weight Axial Radial Load inertia Speed range Motor Torque Backlash | | |
| | | Dimensions | | | 500mm 500mm 225mm 210 Kg 500 Kg (educed to 50 Kg. if used in spin mode} 100 Kg. 10 Kg.m | | |
| | | |
| | | Load Capacity | | |
| | | |
| | | |
| | | Rotary Drive | | | 0(1 /4,5r.p.nv 0,5/15 rpm 20 N.m. cont. Zero | | (position mode) (spin mode) | | |
| | | |
| | | |
| | | |
| | | |
| | | •This speed is selected as being a reasonable operation maximum only | | |
| | | |
| | | Angular System | | Resolution Accuracy RppPAMhility Encoder | | 0,2 arc sees +/-1 arc sees */- 0,2 Ac Sees H ei denh an/Ren i sha w OVpp • Afldfticrial reference signal) | | |
| | | |
| | | |
| | | |
| | | Accuracy Of Rotation | | |
| | | Radial Axial Coning of Axis | | 0,2 microns 0,2 microns +/-1 arc seconds | | |
| | | |
| | | |
| | | |
| | | Geometric Tolerances | | Flatness of Platen Surface: 5 microns Runout of Platen Surface: 5 microns Parallelism of Platen to Base Surface: 10 microns | | |
| | | |
| | | |
| | | Bearing Stiffness | | Axial Radial Tilt | | |
| | | 690N/micron 100N/micron 120Nm/SK. | | |
| | | |
| | | |
| | | Supplies | | Filtered aid dried 5/7Bar (SOp.s.i.) 10 L7 mirute 230v 50-ôOHz | | |
| | | Air Pressure Flow (approx.) Electrical | | |
| | | |
| | | |
| | | Options | | Air Base Flotation +/- 0.5 arc sees angular accuracy | | |
| | | |
| | | |
| | | www. RPIuk.com | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |