I100 Double Sheet Detection in Sheet Metal Processing - 4 Pages

Add to MyDirectIndustry favorites
I100 Double Sheet Detection in Sheet Metal Processing

Catalog excerpts

Double Sheet Control System I100 Dual head double sheet detection system for ferrous and nonferrous materials ► Teach-In ► Clear-Type-Display ► 3 Outputs ● Dual head sensors (transmitter / receiver), inductive ● Non-contact double sheet control of - Ferrous-material 0.05 - 4 mm (0.02 - 0.16 in) (single sheet) - Non-ferrous-material 0.05 - 12 mm (0.02 - 0.50 in) (single sheet) ● Suitable for fluttering sheets ● Easy set-up by key operation or via control input ● LCD display for visualization of nominal / current values, operational / error message, key allocation - Control unit for DIN-rail mounting, protection class IP00 - Control unit for machine frame mounting in protective enclosure, protection class IP54 The manual contains detailed security instructions These devices are NOT suitable for personnel safety applications. Never use these products as sensing devices for personnel protection. Their use as a safety device may create an unsafe condition which could lead to injury or death.

 Open the catalog to page 1

DOUBLE SHEET CONTROL SYSTEM I100 When feeding sheets automatically, more than one sheet can be inadvertently fed into the processing machine. This can result in damage of the machine and tools, expensive repairs and production loss. The dual head Double Sheet Detector I100 has been designed to prevent such events. Sensor mounting The sensors can be installed in any position: horizontally or vertically. Transmitter and receiver must be aligned to each other “face-to-face”. - Preferably, sensors should „stick out“ when mounted in steel brackets. - Use plastic brackets for flush mounting. -...

 Open the catalog to page 2

DOUBLE SHEET CONTROL SYSTEM I100 Technical Data I100 Supply voltage Power consumption Power / Switching indication LCD display, 2 lines, 16 characters each Ambient temperature Switching outputs 0-1-2 - Sheet Opto coupler outputs, output sourcing (PNP) Temperature drift of switching point Switching capacity Measurement period For machine frame mounting Terminal Block / Plug connection Enclosure Class of protection Weight fault power 2 sheet 1 sheet 0 sheet Ø4.5mm DOUBLE SHEET DETECTOR I100 Schirm / shield grün / green weiß / white braun / brown Schirm / shield weiß / white braun / brown...

 Open the catalog to page 3

DOUBLE SHEET CONTROL SYSTEM I100 Abbreviated Set-up / Teach-In instructions For detailed instructions refer to the Operating Manual Teach-In instructions S54 Empfänger Receiver Sender Transmitter SxxS ExxS 1. Set the sensor distance (Ax) according to the statements in the sensor diagrams. 2. Put a sheet with nominal thickness fully into the gap between the sensors. (see connection sketch) 3. Press the SETUP key and then the NEW key, a new Teach-In procedure will then be performed. 4. The green LED (1-SHEET) lights up now, the measuring value is stored. 5. Functional check: If a second sheet...

 Open the catalog to page 4

All ROLAND ELECTRONIC catalogs and technical brochures

  1. NS9N-AAD-SC

    4 Pages

  2. SND40 for tubes

    4 Pages

  3. SND40 for coils

    4 Pages

  4. ECT40

    4 Pages

  5. SIS Calibrator

    4 Pages

  6. C100

    4 Pages

  7. XA100

    4 Pages

  8. SND8S

    4 Pages

  9. NS9SC

    4 Pages