Group: Rohde & Schwarz
Catalog excerpts
Test & Measurement R&S®TS-EMF EMF Measurement System Easy, frequency-selective measurement of EMF emissions
Open the catalog to page 1R&S®TS-EMF EMF Measurement System At a glance In combination with Rohde & Schwarz spectrum analyzers, the R&S®TS-EMF measurement system detects high-frequency electromagnetic fields in the environment (EMF). The isotropic antenna, together with the software, which has been specifically designed for EMF measurements, allows simple and precise evaluation of total and individual emissions on site. Measuring EMF emissions in line with national and international standards provides a basis for ensuring that transmitter systems comply with the applicable limits and for communicating this to the...
Open the catalog to page 2R&S®TS-EMF EMF Measurement System Benefits and key features Safety based on exact measurements for reproducible and reliable results ❙❙ Evaluation of total emissions, individual radio ervices or s individual frequencies ❙❙ Measurements in line with all common EMF tandards s and measurement methods ❙❙ Correct evaluation of complex scenarios or RF ignals s ❙❙ Excellent reproducibility using automated easurements m ▷▷ page 4 Efficient on-site measurements ❙❙ Fast, efficient measurements thanks to predefined test routines ❙❙ On-site interpretation of results using integrated report...
Open the catalog to page 3Safety based reliable results Evaluation of total emissions, individual radio services or individual frequencies Discussion about radiation exposure frequently focuses on individual transmitter sites or radio services. However, it is important in all cases to measure and assess the total The R&S®TS-EMF measurement system provides an over- view of the total emissions along with the individual re- sults, e.g. for specific radio services. Moreover, for each subrange, the individual frequencies can be accessed to identify the emitters. Emissions that are not allocated to any measurement packet...
Open the catalog to page 4£ RFEX - FAST System Softw File Configuration Export System Copyright 20D3 Rohdc iSchwarz Correct evaluation of complex scenarios or In an EMF measurement, it is important to ensure that sig- nals with different bandwidths, modulation schemes and timing structures are correctly detected. The R&S®TS-EMF measurement system meets this requirement by covering frequency subranges with individually configured mea- surement packets. This makes it possible to correctly mea- sure a mixture of different signals. The R&S®TS-EMF offers two different measurement modes: The R&S®RFEX-Fast measurement...
Open the catalog to page 5Efficient on-site Fast, efficient measurements thanks to predefined test routines Predefined test routines and an automated test sequence allow measurements without a high expenditure on per- sonnel along with a fast response to special requests and discussions or questions at the test site. On-site interpretation of results using integrated report generation The automatically generated test report is useful for im- mediate evaluation of the measurement. The graphical presentation offers a fast overview, while the table shows precise results. Results are displayed as absolute values or as a...
Open the catalog to page 6Suitable for a wide range of applications Investigation of specific problems or radio signals by directly setting individual measurement parameters Besides handling standard measurements, the R&S®RFEX measurement software also allows detailed onfiguration c of the measurement parameters. This makes the R&S®TS‑EMF an ideal tool for further in-depth analysis, as required for many studies, for example. Additional manual measurements using a fullfledged spectrum analyzer In many cases, the EMF measurement is only one out of a whole series of measurements, e.g. when commissioning base stations...
Open the catalog to page 7Coverage of the complete frequency range from 9 kHzto6 GHzusingisotropic ntennas a Three isotropic antennas are used to cover the entire frequency range from 9 kHz to 6 GHz: ❙ Isotropic loop antenna, 9 kHz to 200 MHz ❙ Isotropic antenna, 30 MHz to 3 GHz ❙ Isotropic antenna, 700 MHz to 6 GHz Providing a frequency range from 9 kHz to 6 GHz, the antennas cover all common radio services as well as important standards such as EN 50400 and EN 50492. All services in the frequency range from 700 MHz to 6 GHz important to mobile radio and broadband services are covered with a single...
Open the catalog to page 8Models The R&S®TS-EMF supports the following spectrum analyzers: R&S®RFEX-Fast R&S®RFEX Decoding WCDMA R&S®FSH-K40 required corresponding R&S®TSMW options required corresponding R&S®TSME options required R&S®RFEX-Fast option on analyzer with R&S®TSEMF-K12 and R&S®FSL-K400 or -U400 For support of other analyzers, see the R&S®TS-EMF user manual or contact Rohde & Schwarz R&S®TS-EMF with spectrum analyzer or EMI test receiver R&S®TS-EMF with Rohde & Schwarz spectrum analyzer or network scanner R&S®RFEX software Three isotropic antennas 9 kHz to 6 GHz network scanner Optional WCDMA and LTE...
Open the catalog to page 9Specifications Isotropic antennas Measurement principle isotropic reception due to orthogonally arranged antenna elements that are electronically switched Frequency range Minimum detectable field strength Maximum field strength Mechanical design ≤ ±2.1 dB, ≤ ±2.5 dB (0.6 GHz to 2 GHz), ±1.0 dB (f = 900 MHz), ≤ ±2.2 dB (2 GHz to 3.6 GHz), ±1.7 dB (f = 1800 MHz) ≤ ±3.0 dB (3.6 GHz to 6 GHz) radome protection against mechanical damage and environmental hazards Antenna factor individual calibration data, saved on USB dongle and/or CD Axis switching RF solid state switch Connecting cables direct...
Open the catalog to page 10Ordering information Designation Order number Portable EMF Measurement System, requires R&S®TSEMF-Bx antenna, (without spectrum analyzer and notebook) Options R&S®TS-EMF Accredited Calibration for R&S®TSEMF-B1 or R&S®TSEMF-B2 (for R&S®TSEMF-B1 ISO calibration below 200 MHz, DAkkS above 200 MHz) 3) Keycode for R&S®RFEX Measurement Software on R&S®FSL spectrum analyzer (requires R&S®FSL-K400 or R&S®FSL-U400) WCDMA Decoding for R&S®TS-EMF (can be used with R&S®FSL/FSU/FSW spectrum analyzers and R&S®ESR/ESRP/ESU test receivers); includes R&S®TSEMF-U2 option WCDMA Decoding for R&S®TS-EMF (can be...
Open the catalog to page 11All Rohde Schwarz catalogs and technical brochures
-
R&S®FPC Spectrum analyzer
16 Pages
-
R&S®ZNL vector network analyzer
18 Pages
-
R&S®MXO 4 Oscilloscope
40 Pages
-
R&S®RTE1000 oscilloscope
40 Pages
-
R&S®FPL1000
20 Pages
-
R&S®ZNA vector network analyzers
52 Pages
-
R&S®HF907
2 Pages
-
R&S®RO129 Antenna Rotator
6 Pages
-
R&S®PR100 Portable Receiver
30 Pages
-
R&S®ETC Compact TV Analyzer
12 Pages
-
R&S®RSC Step Attenuator
10 Pages
-
R&S®RTA4000 Oscilloscope
22 Pages
-
R&S®NRP Power Meter Family
40 Pages
-
R&S®EVSF1000
12 Pages
-
R&S®UMS175
10 Pages
-
R&S®AVHE100
24 Pages
-
HM8030
2 Pages
-
R&S®HMC8015 Power Analyzer
10 Pages
-
R&S®HM8118 LCR-Bridge
2 Pages
-
Digital Multimeter HMC8012
3 Pages
-
Mobile network testing solutions
20 Pages
-
Value Instruments Catalog
69 Pages
-
Test & Measurement Catalog 2016
266 Pages
-
R&S®BBA150 Broadband Amplifier
16 Pages
-
R&S®UPZ Audio Switcher
6 Pages
-
R&S®SMZ Frequency Multiplier
8 Pages
-
Test & Measurement Catalog 2013/2014
214 Pages
-
R&S®CMW-CU Control Unit
6 Pages
-
R&S®FSQ Signal Analyzer
14 Pages
-
R&S®FSU Spectrum Analyzer
16 Pages
-
R&S®RTE-B1 Mixed Signal, 400 MHz
26 Pages
-
R&S®RTO Digital Oscilloscopes
32 Pages
-
R&S®ZVB Vector Network Analyzers
20 Pages
-
R&S®IQR I/Q Data Recorde
16 Pages
-
R&S®CMA180 Radio Test Set
16 Pages
-
R&S®CBT/CBT32 Bluetooth® Tester
20 Pages
-
R&S®UPV Audio Analyzer
24 Pages
-
R&S®RTE Digital Oscilloscope
26 Pages
-
R&S®TSMX-PPS2 GPS Module
4 Pages
-
R&S®CMW500 Platform overview
20 Pages
-
R&S®EM010 VXI HF Receiver
10 Pages
-
EMC Precompliance Solutions
79 Pages
-
UMS120 Monitoring Syste
8 Pages
Archived catalogs
-
Network Operators Catalog
18 Pages
-
Broadcasting Catalog
144 Pages
-
Secure communication Catalog
274 Pages
-
T & M Product Catalog
146 Pages
-
R&S®RF Step Attenuators
2 Pages
-
Q8384 Optical Spectrum Analyzer
10 Pages
-
R&S®NRP Power Meter
22 Pages
-
Audio Analyzers ¸UP 300/¸UP 350
16 Pages
-
R&S®ZVL Vector Network Analyzers
14 Pages
-
SMU200A Flyer
2 Pages
-
SMU200A Vector Signal Generator
44 Pages
-
R&S®EVS300 ILS/VOR Analyzer
12 Pages
-
WiMAX Communication Tester
16 Pages