video corpo

R&S®SMATE200A Vector Signal Generator
12Pages

{{requestButtons}}

Catalog excerpts

R&S®SMATE200A Vector Signal Generator - 1

Product brochure Version 01.00 Vector Signal Generator ¸SMATE200A The production solution based on the ¸SMU200A

Open the catalog to page 1
R&S®SMATE200A Vector Signal Generator - 2

Based on the successful ¸SMU200A platform, the ¸SMATE200A is specically designed for production environments. As such, the display and front panel user interface have been removed, the connectors moved to the rear, and performance has been optimized for fastest setting times to improve factory throughput. Like the ¸SMU200A, however, the two-generators-in-one concept has been kept, occupying four height units – a plus for production where space is at a premium. All of this is available without compromising the Vector Signal Generator ¸SMATE200A excellent RF performance and baseband exibility...

Open the catalog to page 2
R&S®SMATE200A Vector Signal Generator - 3

Outstanding signal quality ◆ Very short setting times for frequency and level (e.g. for frequency changes <2 ms over GPIB and <400 µs in List mode) ◆ Fast Hop mode offering exibly addressable frequency/level pairs; as fast as normal List mode ◆ Multisegment waveform function enables fast switching between different test signals in waveform generator ◆ Special hardware triggers for basic functions ◆ Electronic attenuator for entire frequency and level range ◆ Status LEDs on front, connectors on rear ◆ Revised cooling concept for longer life in production ◆ Very low SSB phase noise (typ. –135...

Open the catalog to page 3
R&S®SMATE200A Vector Signal Generator - 4

is ideal for production lines where time is critical. In remote control operation via the EC/IEEE bus, setting times are <2 ms and even faster in List mode (<400 ps) where predetermined changes in frequency and level outputs may be specified in advance. Hop mode improves List mode capabil- ity by allowing users to arbitrarily address sequence via a serial bus, maximizing flex- ibility for test engineers. To further reduce test times, special hardware triggers are also added, allowing control of frequently used functions, including RF ON/OFF and MODULATION ON/OFF. All of these enhancements...

Open the catalog to page 4
R&S®SMATE200A Vector Signal Generator - 5

In production, one problem facing test engineers is the tradeoff between test time and the need to stimulate each DUT with varying, complex signals. The ¸SMATE200A has the answer: the multisegment waveform function. This feature allows users to combine up to 100 waveforms stored simultaneously in memory, making it possible to switch between waveforms without rst having to load each one separately. This not only saves time during setup, but more importantly reduces the time for switching between waveforms to around 5 µs. Users even have the option to specify seamless linking of waveforms to...

Open the catalog to page 5
R&S®SMATE200A Vector Signal Generator - 6

Outstanding signal quality Like the ¸SMU200A, the ¸SMATE200A offers internal baseband generation of signals with up to 80 MHz RF bandwidth. A at frequency response across this bandwidth is a prerequisite for generating signals with good modulation characteristics such as EVM, and the ¸SMATE200A makes no compromises. For RF bandwidth requirements up to 200 MHz, users may input analog I/Q signals to each RF path independently. The ¸SMATE200A offers all of this plus the same high spurious suppression that has come to be known in the ¸SMU200A. Typical single sideband phase noise at 100 MHz, 850...

Open the catalog to page 6
R&S®SMATE200A Vector Signal Generator - 7

With its two-path concept, the ¸SMATE200A not only offers two independent RF sources, but also up to two independent baseband generators whose signals can be digitally added internally. The result is a single instrument containing two units specically designed to work together. This eliminates the need for external cabling, making setup both simple and compact. Spurious suppression of the internal baseband generators The high-precision level control of the ¸SMATE200A is based on a temperature-controlled RMS detector. This not only translates to high precision, but also to high level...

Open the catalog to page 7
R&S®SMATE200A Vector Signal Generator - 8

Connectivity Versatile connectivity of the ¸SMATE200A combines classic RF BNC outputs with additional inputs and outputs through SCSI connectors. These connectors further simplify and speed up installation during setup. SCSI connectors An external keyboard and a mouse or memory stick can be connected via USB interfaces on the rear panel. Likewise, a VGA output is available for connecting an external display. Connectors for PC peripherals The ¸SMATE200A can be remotecontrolled via GPIB or LAN interfaces. With the introduction of the ¸SMATE200A, the capability to utilize a Gigabit Ethernet is...

Open the catalog to page 8
R&S®SMATE200A Vector Signal Generator - 9

Condensed data Frequency Frequency range Setting time Setting time in List mode Level Range Range with high-power output option Setting time Spectral purity (f = 1 GHz) Nonharmonics Carrier offset >10 kHz Carrier offset >850 kHz SSB phase noise (20 kHz carrier offset, 1 Hz measurement bandwidth) Wideband noise (carrier offset >5 MHz, 1 Hz measurement bandwidth) ACLR performance 3GPP FDD test model 1, 64 DPCHs <–80 dBc <–86 dBc typ. –135 dBc typ. –140 dBc with low phase noise option typ. –153 dBc (CW) typ. –149 dBc (I/Q modulation) typ. 70 dB Arbitrary waveform generator Memory depth...

Open the catalog to page 9
R&S®SMATE200A Vector Signal Generator - 10

Ordering information Designation Vector Signal Generator Including power cable, Quick Start Guide and CD-ROM (with operating and service manual) Options RF Path A Low Phase Noise and analog modulation FM/ΦM High-Power Output Low Phase Noise and analog modulation FM/ΦM High-Power Output Baseband Baseband Generator with ARB (64 Msamples) and Digital Modulation (realtime) Baseband Generator with ARB (16 Msamples) and Digital Modulation (realtime) Baseband Main Module Digital modulation systems Digital Standard GSM/EDGE Digital Standard 3GPP FDD 3GPP Enhanced MS/BS Tests incl. HSDPA Digital...

Open the catalog to page 10
R&S®SMATE200A Vector Signal Generator - 11

Recommended extras Hardcopy manuals (in English, US) Adapter for Telescopic Sliders BNC Adapter Board for AUX I/O Connector Keyboard with USB Interface (US assignment) Mouse with USB Interface, optical External USB CD-RW Drive The base unit can only be ordered with an ¸SMU-B10x frequency option. CDMA2000® is a registered trademark of the Telecommunications Industry Association (TIA -USA). ¸WinIQSIM™ requires an external PC. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Rohde & Schwarz is under license. Vector Signal Generator ¸SMATE200A

Open the catalog to page 11

All Rohde Schwarz catalogs and technical brochures

  1. R&S®FPL1000

    20 Pages

  2. R&S®HF907

    2 Pages

  3. R&S®EVSF1000

    12 Pages

  4. R&S®UMS175

    10 Pages

  5. R&S®AVHE100

    24 Pages

  6. HM8030

    2 Pages

Archived catalogs