Plug.n.DAQ Lite IEPE USB Front End - ROGA-Instruments - #1

Text version of the page

INTELLIGENT MEASURING EQUIPMENT www.roga-instruments.com ROGA-Instruments, Steinkopfweg 7, D-55425 Waldalgesheim Phone: +49 (0) 6721-98 44 54, E-Mail: info@roga-instruments.com Plug.n.DAQ Lite IEPE USB Front End ROGA Plug.n.DAQ Lite Plug.n.DAQ Lite is a compact 2channel in/out data acquisition device for recording and analysis. It features the widespread USB interface and requires no driver installation. In adition to AC inputs it directly supports IEPE-type sensors, such as microphones and accelerometers. The outputs may be used for monitoring, playback or signal generation. Filters on the input and output and instrumentationquality amplifiers ensure reliable 16-bit data. With a bandwidth up to 24KHz per channel and simultaneous sampling Plug.n.DAQ Lite is highly flexible and may be used with all software packages supporting audio devices. It comes in a rugged aluminum housing, prepared to go wherever the measurement job requires. Supported operating systems: All Analog Input: 2ch single ended BNC, IEPE Impedance 100 kOhm IEPE power fixed 24 V/4mA Input ranges 5 V Bandwidth 3.5 Hz to 24 kHz (-3 dB) 10 Hz to 22 kHz (-0.5 dB) Sampling Frequency 32 kHz; 44.1 kHz & 48 kHz Absolute accuracy 1% typical Gain accuracy 0.2 % or better Distortion 90 dB Pass band ripple 0.2 dB Out of band rejection -50 dB or better Others: Sampling rates (simultaneous sampling 16bit) 48 KHz, 44.1 KHz, 32 KHz, 22.05 KHz, 16 KHz, 11.025 KHz, 8 KHz (analog in only) Powered by USB (power consumption < 1W) Usable temperature range +/- 0 to +50 °C Storage temperature range -10 to +60 °C Dimensions 82 (w) x 150 (d) x 32 (h) mm Weight Approx. 50 grams TECHNICAL DATA: