/

" Compact Microphone

MI-17

ROGA MI-17 TECHNICAL DATA:

Analog Inpu

These 1/4"-measuring microphones are industrial pressure transducers. The model MI-17 have integrated electronics, and can bedelivered with sensitivities from 10 to 100 mV/Pa at toler-ances of within ±5%. Special custom versions are also pos- sible. Industrial power supplies for the microphones can be either aconstant current source of 2–6 mA (standard version) or a constant voltage source 4–30 Volts. Normally the micro- phones are fitted with BNC-connectors (fem.) allowing standard BNC-BNC cables to be used. Other connectors suchas TNC, SMB, Lemo or µdot are also available on request. These microphones are quite suitable for array applications.

Frequency response (typical) 30 Hz –4 kHz: ± 0.5 dB 4 kHz –20 kHz: ± 1.5 dB Temperature range -10 – +50 °C Sensitivity 50 mV/Pa Noise (Lin: 20 Hz – 20 kHz) 35 dB (SPL) („A“-wighted) 26 dB (SPL) Max. peak SPL 130 dB (ref. 20µPa) Constant supply current 2 – 6 mA Output impedance 50 Dimensions – total length 93 mm Tube – diameter 8 mm
ROGA-Instruments, Steinkopfweg 7, D-55425 Waldalgesheim Phone: +49(0)6721-984454, Fax: +49(0)6721-984474 Connector BNC (fem.) Weight 23 grams