DURO-TA XT KEY BAR CHUCK
8Pages

{{requestButtons}}

Catalog excerpts

DURO-TA XT KEY BAR CHUCK - 1

The flexible lightweight for large and small workpieces

Open the catalog to page 1
DURO-TA XT KEY BAR CHUCK - 2

DURO-TA XT KEY BAR CHUCK To meet the requirements of turning and milling machines for flexibility, workpiece accessibility and weight reduction, RÖHM combines tried and proven technology with innovative concepts. Equipped with the proven DURO-TA base body and innovative guideways, the new DURO-TA XT is convincing as a flexible lightweight for machining large and small workpieces. The new DURO-TA XT has an innovative concept for guideways that guarantees flexible and weight-reducing use. In contrast to other large chucks, the DURO-TA XT is up to 75 % lighter and that way makes maximum...

Open the catalog to page 2
DURO-TA XT KEY BAR CHUCK - 3

BENEFITS AT A GLANCE WEIGHT-REDUCING BY UP TO 75 % Weight-reducing construction makes maximum utilisation of the machine's potential possible and clamping of higher workpiece weights Protection of the machine's spindle and therefore lower maintenance costs MAXIMUM FLEXIBILITY AND FASTER CONVERSION Flexible clamping area through extended guideways for fast conversion to large and small workpieces Easy disassembling of the guideways for clamping smaller workpieces INNOVATIVE CONSTRUCTION Minimum interfering contours and better workpiece accessibility through compact construction and reduced...

Open the catalog to page 3
DURO-TA XT KEY BAR CHUCK - 4

full base plate max. lightweight base plate DURO-TA XT key bar chuck, with complete base plate Item no. Max. total clamping force kN Clamping range external with extended jaws mm Clamping range external with standard jaws mm Weight reduction compared to a standard chuck % Reduction of construction height compared to a standard chuck mm Customized adaptations of the base plate for further weight reduction on the machine table on request * By disassembling of the stripping cap and use of standard reversible jaws ** By shortening of the base jaws. Please consider shorter clamping ranges ***...

Open the catalog to page 4
DURO-TA XT KEY BAR CHUCK - 5

JAWS DURO-TA XT A28 One-piece jaw EB, set, diagonally toothing, hardened Item no. Chuck Size Additionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. Jaws only usable in basic chuck. A28 Unstepped Jaw BL, set, diagonally toothing, unstepped, soft, material 16MnCr5 Item no. Chuck Size Jaws only usable in basic chuck. A28 Reversible top jaw UB, set, hardened Item no. Chuck Size Additionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. Jaws only...

Open the catalog to page 5
DURO-TA XT KEY BAR CHUCK - 6

JAWS DURO-TA XT C 15 Interchangeable clamping inserts, 1 piece, with claws Item no. Chuck Size Jaws only usable in basic chuck. C 15 Interchangeable clamping inserts, 1 piece, with serrated toothing Item no. Chuck Size Jaws only usable in basic chuck. C 15 Interchangeable clamping inserts, 1 piece, with heat treatable surface Item no. Chuck Size Jaws only usable in basic chuck. A28 Reversible top jaw UB, set, hardened Item no. Chuck Size Additionally or later purchased, hardened jaws must be ground out in the chuck.. For jaws which are applied later, send in the chuck. A28 Unstepped top jaw...

Open the catalog to page 6
DURO-TA XT KEY BAR CHUCK - 7

JAWS DURO-TA XT C 21 Reversible claw-type top jaws, standard design, tongue and groove, middle sized clamping range, 1 piece, hardened Item no. Chuck Size C 21 Reversible claw-type top jaws, standard design, tongue and groove, large clamping range, 1 piece, hardened Item no. Chuck Size C 21 Reversible claw-type top jaws, large design, tongue and groove, small clamping range, 1 piece, hardened Item no. Chuck Size C 21 Reversible claw-type top jaws, large design, tongue and groove, middle sized clamping range, 1 piece, hardened Item no. Chuck Size C 21 Reversible claw-type top jaws, large...

Open the catalog to page 7

All RÖHM GmbH catalogs and technical brochures

  1. F-SENSO 2

    9 Pages

  2. SUPRA SK

    2 Pages

  3. SUPRA SK E

    2 Pages

  4. PRIMA-S / -M

    1 Pages

  5. THE DURO-A.

    2 Pages

  6. BOHRFUTTER

    44 Pages

  7. ZS-ZSU

    2 Pages

  8. MKS

    1 Pages

  9. SUPRA-SK E

    1 Pages

  10. Oil and Gas

    24 Pages

Archived catalogs