LT1000 Tilting Stacker - Rocla - (Version JPG) - Page n° 4 - PDF Catalogue | Technical Documentation

Tilting Stacker

LT1000M

LT1000TE


Capacity kg		1000	1000
Lifting height mm	A	285	285
Fork length mm	B	800	800
Overall height mm (inc. handle)	C	1135	1090
Overall width mm	D	640	780
Outside width over forks mm	E	560	560
Fork overhang mm	F	135	135
Overall length mm	G	1325	1325
Height in upper position mm	H	950*	950*
Height in lower position mm	H	750*	750*
Fork height, fully lowered mm		85	85
Load centre mm	J1	max. 400	max. 400
Load centre mm	J2	min. 200/max. 420	min. 200/max. 420
Width between forks mm	K	234	234
Motor			0,8 kW 12 V
Pump force required at 100 kg lifting/tilting kg		5/6
Pump force required at 1000 kg lifting/tilting kg		32/34
Lifting speed, lift/tilt s			4/14
Lowering speed, lift/tilts s			3/11
Weight kg		178	176**

it A

does not include handle without battery

The operator of tilting stacker can work without the necessity of bending down or stretching up. Tilting stacker applies both to standing and sitting work positions: the forks can be tilted up to 90° and the working height is adjustable between 750 mm and 950 mm. The handle can be turned to the side and locked. This gives unrestricted access to the box.

Tilting stacker is available in two models, with manual or electric lift and tilt. Manual tilting stacker has the two-stage pump, which offers quick-function in both lifting and tilting. The model is very durable because of its hard-chromed pistons and double seals. In the second model the electric lifting and lowering function are integrated to the handle and the tilt function is operated by remote control. The user can adjust the tilting during working. In addition the stacker is very agile thanks to one forced steering wheel.

Roela

Ri P.i

cla Oyj

. Box 88, FI-04401 Järvenpää, Finland

Tel. +358 9 271 471, Fax +358 9 2714 7440 www.rocla.com, e-mail: rocla@rocla.com

LT1000 Tilting Stacker - Rocla - #4

Pallet truck, Stacker, Reach truck, Sit-on stacker, Hand pallet truck