| [1] The catalog numbers listed are not complete: • Select the control voltage type from table on page 205 (e.g., 2173B-EABD). • Select the horsepower from table on page 206 (e.g., 2173B-EABD-48). • Select the circuit breaker type from table on page 211 (e.g., 2173B-EABD-48CA). • For circuit breaker size based on load horsepower, refer to publications 2100-TD001x-EN-P and 2100-TD002r-EN-P. The catalog numbers listed include an external reset button for the overload relay. To order catalog numbers without the external reset button, replace the letter "A" for the letter "K" (e.g., 2173B-BK_-_) or replace the letter "D" with the letter "J" (e.g., 2173B-BJ_-_). [2] Delivery program is PE-II in United States and SC-II in Canada for 600V and SC-II in United States and PE-II in Canada for 480V. [3] Available with Type B wiring only. [4] Vertical section contains horizontal power bus that is mounted 5" deeper than standard. A special bus splice kit is provided when a NEMA size 6 starter is selected adjacent to a standard 20" deep vertical section. Not available in NEMA Type 3R, Type 4, or back-to-back construction. [5] For 200 Hp at 240V or 400 Hp at 480V, suffix letter identifying circuit breaker must be CT or CM only. [6] Frame mounted 20" deep section without vertical wireway. Horizontal bus is 5" deeper than standard. |