catalogue search
P. 01
P. 02
P. 03
P. 04
|
|
|
|
You may also be interested in
Planer, Bag dust extractor, Sliding table saw, Wood thicknesser, Saw
Text version of the page
| 2 | 3 | |||||||||||
| 1 | ||||||||||||
| For more than 25 years, Robland have been one of the worlds most important woodworking machinery manufacturers. This experience is your guarantee of the quality of the Robland LX310 combination woodworker. A smooth running, large capacity sliding table, supported by a telescoping arm, transforms the LX310 into a small panel saw with 1290 mm crosscut capacity! A triple motor drive system allows the sawbench, spindle moulder and planer/thicknesser to operate independently. Change-over is achieved instantly via a selection switch on the control panel. There is an extension table on the spindle table of the LX310 and also a mounting table for a power feeder. This folds away when the feeder is not required. 1 .The new saw fence allows parallel cuts upto 600. mm 2.The sturdy fence can be set to mitre arges up to 45 degees and is complete with a clear scale, eccentric woodclamp and flip-over stop. 3.The sawguard raises, lowers and tilts with the blade. They both retract fully below the table simply by sliding the table insert out. All in seconds, with no tools required. 4.The large cast iron table slides on two 30 mm barsThese bars can be repositioned along the machine frame in secondsThis allowsthe table stroke to be ideally positioned to suit working with the saw or spindle. 5.The long planer tables make straightening workpieces easy Fne adjustment of the tables is also easy thanks to the large handscrews. | ||||||||||||
| In the standard version the machine is equped with the smaller sliding table. In this version the maximum crosscut is 960 mm Optionally; a larger siding table and longer bar system s avaitbe (without telescopic arm and table extension). This increases the crosscut capacity from 920 mm to 1290 rrmlhs machine is available with an planer/thicknesser width of 310 mm (X310) and 260 mm (X260). Apart from this table width difference, the same technical data apply to both the X310 and X260. | ||||||||||||