Sift-Proof Application System - ROBATECH - #2

/ 2


catalogue search
P. 01
P. 02
Pages:


See other catalogues for ROBATECH

Text version of the page
Application
The applicator head enables the production of sift-proof folding boxes for detergent pow­ders, salt, animal feed and other free-flowing products in powder form. Several lines of be­ads next to each other are applied precisely onto the folding box, resulting in full-surface and tight glueing when the flap is pressed in­to position. The cost-effective sift-proof glue­ing method permits to replace conventional packs featuring heat-sealed inner bags, liners or protective films.
Precise glue application
The applicator head for sift-proof glueing ena­bles the precise and reliable glueing of all conventional carton sizes. Short reaction ti­mes mean that higher speeds and a reduced glue consumption can be achieved. Exact me­tering prevents contamination due to strin­ging, i.e. the maintenance effort is lower and the equipment's availability is improved.
Fast format change
The most varied folding boxes can be glued and thanks to the module blocks it is possible to change the format within two minutes without using any tools.
Robatech
Modular applicator head for sift-proof glueing
Benefits
• Cost savings thanks to a reduction of the packaging material
• Less cleaning required, better availability thanks to precise glue application without stringing
• Simple and faster format change without tools
• Increased speed thanks to short reaction time
Filter at the inlet prevents blocked nozzles
Technical data
Application widths
For all usual box sizes
Adhesive pressure
max. 72 bar
Adhesive viscosity
500...2000 mPas
Temperature range
50...1 85° C or! 22...365° F
Temperature control
with NTC sensor, accuracy ± 0.5° C
Nozzle types
Single-hole and two-hole nozzles, hole spacing 3.66 mm
Nozzle diameters
0.30 and 0.25 mm, channel length 2.5 mm
Operating voltage
200...240 Volt AC, 50/60 Hz, 1 000 Watt
Air pressure supply
5...6 bar, dry, cleaned, not oiled
Bracket
Mounting bolts with M8 tap holes
Simple format change thanks to quick-action locks
Robatech AG Pilatusring 10
CH-5630 Muri / Switzerland Phone +41 56 675 77 00 Fax +41 56 675 77 01 Email info@robatech.ch Internet www.robatech.com
Part No. 1 34462 / Ro0904 / 200 / Subject to change

pageCatalog pdf di En 2012-06-22-01