DWX-english - RM Prüftechnik GmbH - #1

Text version of the page

DWX Series DWX-01 DWX-05 DWX-10 1000V 5000V 10000V DWX Series Specifications DWX Series Option DWX-01 DWX-05 DWX-10 Applied Voltage, Step, and Energy 50V - 1000V 500V - 5,900V 1,000V - 10,000V * At 1 kOhm Resistive Load (10V Step) (100V Step) (200V Step) Max 5 milli-Joule Max 0.12 Joules Max 0.5 Joules Inductance Test Range More than 10ìH More than 10ìH More than 50ìH Sampling Speed 8 bit / 10 nano-sec. (100MHz) Sampling Memory 8192-Byte Sampling Range 10 Ranges: -4, -3, -2, -1, 0, 1, 2, 3, 4, 5 (Width 0 to 5 is the Compatible Range with the DW Series) Input Test Circuit (Impedance) Resistive Voltage Divider (5 MOhm) Screen Display Resolution 640 x 480 Dots (VGA), 8.4" TFT Color LCD, 4 Color Display Waveform Display Range 512 x 256 Dots Detection Mode Master Waveform Comparison Detection by Area Size Comparison, Differential Area Comparison, and Corona Discharge Master Waveform Memory Internal Memory: 196 + 14 Types (14 Types per Page, 15 Pages) 700-Types by Compact Flash Memory (14 Types/50 Pages) External Interface Parallel I/O (Start, Reset, OK, NG, Busy, Master Numbers, etc.) RS-232C (Test Control, Test Data, etc.) Printer Port (Screen Hard Copy) Ethernet Adapter (Option) Accessories A Test Cable (1.5 m) A Power Cable (With 3P Adaptor) A Compact Flash Memory A Parallel I/O Connector An Instruction Manual and Inspection Record Environmental Conditions 0°C-40°C, AC Voltage Upon Your Request: 100V - 240V ±5% Dimension (Excluding the Handle) / Weight 345(W)x185(H)x370(D), Approx.10 kg 345(W) x325(H) x370(D) Ethernet Adaptor The DWX can be remotely controlled and operated through the Ethernet network and TCP/IP serial convert adaptor. The available control software (DW-Assis Win) helps to operate the data from the PC's Windows. LAN Interface: 10 BASE-T 1 Port Correspond Protocol: TCP/IP Ethernet Impulse Winding Tester The Cutting Edge Winding Test Technology An Innovative Design for Low Inductance Coil! Your New Solution: Clear Waveform Display of 10 ìH Coil This state-of-the-art tester offers a new solution for low inductance coil test. Its advanced technology enhances a complete waveform and partial discharge observation ability by the resistive voltage divider. Its high sampling rate of 100 MHz delivers highly sensitive and precise test. The partial discharge amount calculated by the Laplacian method is displayed clearly in a separate sub-window. Baker Instrument GmbH Hutbergstraße 21 Tel.: ++49 - 911 - 98 46 00 90475 Nürnberg Tax: ++49 - 911 - 98 46 03 0 Germany e-mail: baker_gmbh@t-online.de www.baker-instrument.de