Technical System Catalogue TS 8 Baying Systems
33Pages

Technical System Catalogue TS 8 Baying Systems

Ingeniously simple, fully symmetrical and patented worldwide – that is the secret behind a successful design principle which has been sold more than 10 million times for use in all industries and applications. The TS 8 enclosure system has established a new universal standard, raising the bar across all sectors. ◾ Full flexibility with the use of accessories, ◾ Simple, fast assembly of the mounting plate. thanks to a fully symmetrical frame section, Slide rails may be removed and installed in the with identical accessories for the width and side frame section depth ◾ High protection...

The extrusion is the heart of the TS 8, with its ingenious design offering more efficiency, more flexibility, more quality and more reliability. The functional details of its extrusion have elevated the TS 8 to a global standard, and hence a genuine classic. The symmetry is an ingeniously simple concept on which all the customer benefits offered by the TS 8 are based. Space gains 15% more installation space Baying is supported in all direc- with a cleverly designed two- extrusion creates a symmetrical tions, thanks to identical pitch level concept TS 8 double pillar with an enor- patterns...

Basic features at a glance Sheet steel Sheet steel Front frame: aluminium; Rest: sheet steel Sheet steel with aluminium zinc coating Stainless steel 1.4301 (AISI 304) Mounting plate Mounting plate Mounting plate Mounting plate With sheet steel door(s) at the front With sheet steel door at the front Without front door, with sheet steel rear door With sheet steel door at the front, with aluminium zinc coating With stainless steel door 1.4301 (AISI 304) at the front None, as open front NEMA protection category None, as open front Material Interior installation Supply includes Technical System...

Basic features at a glance Stainless steel 1.4301 (AISI 304) Sheet steel Sheet steel Sheet steel Sheet steel Sheet steel Mounting plate Mounting plate Punched section without mounting flange 23 x 73 mm 482.6 mm (19˝) level front and rear With stainless steel door 1.4301 (AISI 304) at the front With sheet steel door(s) at the front Without front door, for individual front design with partial doors (accessories) With sheet steel door on the front right, left front open With front trim panel Depending on variant, with glazed door (server enclosure) or vented door (network enclosure) Technical...

TS 8 baying systems Internationally recognised approvals and certifications Rittal products boast a wealth of internationally recognised approvals and certifications, and comply with the most exacting and globally recognised quality standards. ◾ All components are subjected to the most stringent testing in accordance with international standards and regulations ◾ The consistently high product quality is ensured by a comprehensive quality management system ◾ Regular production inspections by external test institutes guarantee compliance with global standards Rittal offers approvals for...

TS 8 baying systems CAE data Consistent product data from the EPLAN Data Portal supports interdisciplinary engineering in electrical design and enclosure project management. Integrating the portal solution into the Eplan platform ensures that information is directly available to the engineering team. EPLAN Data Portal Technical System Catalogue/TS 8 Baying Systems

TS 8 baying systems Optimum surface protection The three-phase surface finish of the TS 8 baying system promises optimum corrosion protection and is resistant to mineral oils, lubricants, machining emulsions and solvents such as those used in cleaning. 1 Maximum quality is a 3-step process: 1st phase: Nanoceramic primer 2nd phase: Electrophoretic dipcoat priming 3rd phase: Textured powder coating Metal with triple surface treatment (Rittal standard) following a 180-hour salt spray mist test Powder-coating of the metal only takes place after a 180-hour salt spray mist test has been completed...

TS 8 baying systems Accessories included with the supply All this is included with the supply as standard: ◾ Earthing accessories ◾ Baying seal ◾ Seal for gland plates ◾ Enclosure key ◾ Assembly parts ◾ Mounting plate slide rails ◾ TS support strips (for enclosures from 600 mm depth) PU foam seal ◾ Seamlessly foamed-in ◾ Temperature resistant from -20°C to +80°C ◾ May be over-painted and briefly stove-enamelled at up to 180°C Integral rain channel ◾ Prevents dirt and liquids from collecting on the seal ◾ Removes liquids in a targeted way ◾ Protects the interior from dirt and water deposits...

TS 8 baying systems Unlimited baying options ◾ Around corners, forwards, backwards, to the left or right or even upwards – the baying options are unlimited ◾ Baying connection technology for fast assembly and stable, permanent baying ◾ Bayed TS 8 enclosures may be transported ◾ Doors on all fronts High stability/load capacity ◾ Tested load capacity of the TS 8 frame up to 140 kg ◾ The16-fold profiled extrusion of the TS 8 frame guarantees exceptional stability – with 15% less weight and, at the same time, 30% greater stability than comparable enclosures Technical System Catalogue/TS 8 B

TS 8 baying systems Symmetrical frame ◾ Symmetrical layout supports access from all sides ◾ Identical system accessories in the width and depth for interior installation ◾ Bayable on all sides, thanks to an identical pitch pattern in the depth and width Securely locked ◾ Smooth-running locking rod with secure 4-point lock and double-bit insert ◾ Easily exchanged for comfort handles for semi-cylinders, comfort handles for lock inserts and standard lock inserts ◾ Lock is located outside of the sealing range ◾ Easily closed with one hand Interchangeable door hinge ◾ Door hinge may be swapped...

TS 8 baying systems 2nd mounting level ◾ Up to 15% better space utilisation, thanks to consistent use of the outer mounting level ◾ Extensive system accessories tailored to the frame section for individual interior installation, such as cable trunking and system lights Use of the second level with cable duct Use of the second level with LED system light Two-level concept Universal interior installation ◾ Two symmetrical levels with identical pitch patterns in the width and depth ◾ Interior installation with two mounting levels ◾ Straightforward hole count allows you to find your way around...