Catalogs >
Rite-Hite >
RHH 4000 Hydraulic leveler

RHH 4000 Hydraulic leveler
2Pages

Catalog excerpts

RHH Series Hydraulic Dock Leveler Maximum safety and productivity with the smoothest transition in the industry. Rite-Hite Hydraulic Dock Levelers feature the smoothest transition between the loading dock and trailers to help prevent injuries, and maximize safety and productivity while minimizing forklift and product damage. Smooth transition technology » Ensures smooth transition between loading dock and trailer with constant radius rear hinge, two-point crown control and optimized lip chamfer design features. Reduces forklift operators exposure to whole body vibration which can lead to chronic back and neck injuries. Minimizes product damage. Exclusive safety features » Available 5” (500 mm) or 7” (177.8 mm) high slotted Safe-T-Lip® barrier helps prevent open dock drop-off accidents. » Unique slotted lip design can be positioned out of the way for unobstructed end loading, especially critical with air-ride suspension trailers. » Safe-T-Strut" Maintenance Support System protects personnel during clean out and inspection and provides lockout capability - unique through-the-lip design keeps strut in place when leveler is raised or is side-impacted by lift truck. Platform construction » Structural design incorporates no more than 8” (203 mm) of beam spacing under the deck to accommodate 3-wheel and 4-wheel forklift traffic. » Designed to flex up to 4” (102 mm) under its own weight to maintain a Smooth Transition for forklifts on out of balance trailers. » ANSI MH30.1 tested and certified. Productivity » Infinite lip control allows the operator to extend lip or stop platform any time during leveler travel to assist with loading expediency. Automatic safety protection » Dependable hydraulic velocity fuse automatically stops rapid leveler descent within 3” (76 mm) with heavy load on platform. Environmentally friendly » Hydraulic fluid is biodegradable. Two-point Rugged steel Safe-T-Lip crown control barrier helps address drop-off accidents

Open the catalog to page 1

SpecificationsNominal dimensions Lengths □ 6' (1829 mm) □ 8' (2438 mm) □ 10' (3048 mm) □ 12' (3658 mm) Operation To raise the platform, push and hold the “Raise" button on the NEMA 4X control box. After the lip clears the trailer floor, push and hold the “Lip Out" button while continuing to hold the “Raise" button to extend the lip. Release the push buttons to allow the leveler platform and lip to lower to the truck bed, above and below dock height, without manual chain pulling. The platform is designed to compensate for canted truck beds up to 4" (102 mm) and remains flush with the rear of...

Open the catalog to page 2

RHH 4000 Hydraulic leveler 2Pages

Catalog excerpts

All Rite-Hite catalogs and technical brochures

RHH 4000 Hydraulic leveler
2Pages