All RIFTEK catalogues and technical brochures

P. 1

m RIFTEK A Sensors & Instruments LASER TRIANGULATION SENSORS RF600 Series User's manual 22, Logoisky tract, Minsk 220090, Republic of Belarus tel/fax: +375 17 281 35 13 info@riftek.com www.riftek.com Certified according...

P. 2

Triangulation Laser Sensors, RF600 SeriesContents1.2.3.2Safety precautions ................................................................................................................4Electromagnetic compatibility ...............................................................................................4Laser...

P. 3

Triangulation Laser Sensors, RF600 Series314.1. Current output 4…20 mA ............................................................................................1714.2. Voltage output ............................................................................................................1814.3....

P. 4

Triangulation Laser Sensors, RF600 Series1.Safety precautionsUse supply voltage and interfaces indicated in the sensor specifications.In connection/disconnection of cables, the sensor power must be switched off.Do not use sensors in locations close to...

P. 5

Triangulation Laser Sensors, RF600 SeriesAvoid staring at the laser beam going out of the sensor and the beam reflected from a mirror surface;Do not disassemble the sensor;Use the protective screen mounted on the sensor for the blocking of the outgoing...

P. 1

LASER OPTICAL MICROMETERRF656 SeriesUser’s manual22, Logoisky tract, Minsk220090, Republic of Belarustel/fax: +375 17 281 35 13info@riftek.comwww.riftek.comCertified according ISO 9001:2008Certifiedaccording toto ISO 9001:2008

P. 2

Laser Optical Micrometer, RF656 SeriesContents1.2.3.4.5.6.7.8.2Safety precautions .................................................................................................................................4Electromagnetic compatibility.................................................................................................................4General...

P. 3

Laser Optical Micrometer, RF656 Series15.16.17.Operation of micrometer ......................................................................................................................21Warranty policy.....................................................................................................................................21Distributors...

P. 4

Laser Optical Micrometer, RF656 Series1.Safety precautionsUse supply voltage and interfaces indicated in the micrometer specifications.In connection/disconnection of cables, the micrometer power must be switched off.Do not use micrometers in locations...

P. 5

Laser Optical Micrometer, RF656 Series1Typical data obtained when a knife edge was used to interrupt the laser beam5.Example of item designation when orderingRF656-X-SERIAL-ANALOG-IN-LOUT-СС-MSymbolXSERIAL5DescriptionBase distance (6 or 25),...

P. 1

Il_ BACK-TO-BACK DISTANCE MEASURING GAUGE IMR Series User's manual 22, Logoisky tract, Minsk 220090, Republic of Belarus tel/fax: +375 17 281 35 13 ¡nfo@riftek.com www.rlftek.com Certified according to ISO 9001:20...

P. 2

Back-to-back distance measuring gauge, IMR RIFTEK Contents 1. Safety precautions and measurement conditions......................................................3 2. Electromagnetic compatibility....................................................................................3 3...

P. 3

Back-to-back distance measuring gauge, IMR e$« RIFTEK 1. Safety precautions and measurement conditions • The metering accuracy depends greatly on the wheel surface quality. There- fore it is necessary to carry out the check...

P. 4

Back-to-back distance measuring gauge, IMRL±25 (L – nominal distance)±0.10.1mm, or 0.01 inch **build-in, LED-5…+401figure 1rechargeable batteries 2xAAA, 1.2VMeasurement range, mmMeasurement error, mmIndication discretenessDisplayOperating...

P. 5

Back-to-back distance measuring gauge, IMR e$« RIFTEK 10. Working with the gauge 10.1. Gauge turn-on. Press Red button to turn on the power. The display shows "ErrP" message if the ac- cumulator battery voltage became lower then...

P. 1

LASER TRIANGULATION SENSORS RF605 Series User's manual 22, Logoisky tract, Minsk 220090, Republic of Belarus tel/fax: +375 17 281 35 13 ¡nfo@riftek.com www.rlftek.com Certified according to ISO 9001:2008

P. 2

Triangulation Laser Sensors, RF605 SeriesContents1.2.3.4.5.6.7.8.2Safety precautions .................................................................................................................................4Electromagnetic compatibility.................................................................................................................4Laser...

P. 3

Triangulation Laser Sensors, RF605 Series314.6.3.Saving and writing a group of parameters ..........................................................................2314.6.4.Recovery of default parameters..........................................................................................2315....

P. 4

Triangulation Laser Sensors. RF605 Series en|<a RIFTEK 1. Safety precautions • Use supply voltage and interfaces indicated in the sensor specifications. • In connection/disconnection of cables, the sensor power must be switched...

P. 5

Triangulation Laser Sensors, RF605 Series5.Basic technical dataRF605-Base distance X, ммMeasurement range, mmLinearity, %Resolution, %Temperature driftMax. sampling frequency, HzLight source25/50255045/1004510065/25065250±0.1 of the range0.02...

P. 1

RIFTEK Sensors & Instruments LASER WHEEL PROFILOMETER IKP-5 Series User's manual 22, Logoisky tract, Minsk 220090, Republic of Belarus tel/fax: +375 17 281 35 13 ¡nfo@riftek.com www.rlftek.com Certified according...

P. 2

Laser Wheel Profilometer, IKP-5Contents1.2.3.4.5.6.7.2Safety precautions and measurement conditions .................................................................4Electromagnetic compatibility ...............................................................................................4Laser...

P. 3

Laser Wheel Profilometer, IKP-5313.5. Registration of wear limiting values .............................................................................2513.6. Registration of reference profiles ................................................................................2513.6.1....

P. 4

Laser Wheel Proti lo me ter. IKP-5 1. Safety precautions and measurement conditions • Prior to mounting the profilometer onto the wheel, areas of contact of the side supports with the wheel surface should be thoroughly cleaned from...

P. 5

I .;¡M.-|- Wheel Proli lommer. IkPo 5. Basic data and performance characteristics Name of parameterValueMeasurement range for the flange height, mmflange thickness, mmflange slope, mm20...4520...401 ...15Measurement error for the flange...

P. 1

WHEEL DIAMETER MEASURING GAUGE IDK Series User's manual 22, Logoisky tract, Minsk 220090, Republic of Belarus tel/fax: +375 17 281 35 13 ¡nfo@riftek.com www.rlftek.com Certified according to ISO 9001:2008

P. 2

Wheel diameter measuring gauge, IDKContents21.2.3.4.5.6.7.8.9.Safety precautions and measurement conditions ...................................................... 3Electromagnetic compatibility .......................................................................................

P. 3

Wheel diameier measuring gauge, IDK e§® RIFTEK 1. Safety precautions and measurement conditions • The metering accuracy depends greatly on the wheel surface quality. There- fore it is necessary to carry out the check and...

P. 4

Wheel diameter measuring gauge, IDK5.Example of item designation when orderingIDK-S/B-MIN/MAX-XSymbolDescriptionSВMINMAXХ4Position of measurement, mmBase, mmBottom of measuring range, mmUp of measuring range, mmPosition of indication. А...

P. 5

Wheel diameier measuring gauge, IDK e§® RIFTEK Figure 1 8. Operation principle The measurement of the diameter is performed according to the "three points" technique, without the complete wheel coverage. The measurement method...

P. 1

m> RIFTEK -A, Sensors & Instruments 3D LASER SCANNING SYSTEM SHTRIKH-2 Series User's manual 22, Logoisky tract, Minsk 220090, Republic of Belarus tel/fax: +375 17 281 35 13 ¡nfo@riftek.com www.rlftek.com Certified...

P. 2

"Shtrikh-2", 3D Laser scanning systemContents1.2Safety precautions and measurement conditions ..................................................................................31.1.Notational conventions used in the document ..............................................................................32.Electromagnetic...

P. 3

'Sbirikh-2". .ÌD Laser 1. Safety precautions and measurement conditions • In connection/disconnection of cables, the sensor power must be switched off. • Do not use the system in locations close to powerful light sources. •...

P. 4

"Shtrikh-2", 3D Laser scanning system4.General informationThe “Shtrikh-2” system is intended for non-contact laser scanning of items forthe purpose of obtaining three-dimensional computer model and formation of model filessuitable for subsequent...

P. 5

'Sbirikh-2". .ÌD Laser 6.3. Dynamic parameters of STEP input signal ShapeParameterSymbolConditionMinNormMax Tp Period of STEPTfpTsur=25°C125222  :T,    Time of the aciivelevel of STEPsig-nal,...

P. 1

LASER TRIANGULATION SENSORS RF603 Series User's manual 22, Logoisky tract, Minsk 220090, Republic of Belarus tel/fax: +375 17 281 35 13 ¡nfo@riftek.com www.rlftek.com Certified according to ISO 9001:2008

P. 2

Triangulation Laser Sensors, RF603 SeriesContents1.2.3.2Safety precautions .................................................................................................................................4Electromagnetic compatibility.................................................................................................................4Laser...

P. 3

Triangulation Laser Sensors, RF603 Series313.3.Data packet format ..................................................................................................................1813.4.Data structure ..........................................................................................................................1814....

P. 4

Triangulation Laser Sensors. RF603 Series &|<a RIFTEK 1. Safety precautions • Use supply voltage and interfaces indicated in the sensor specifications. • In connection/disconnection of cables, the sensor power must be...

P. 5

Triangulation Laser Sensors, BF603 Series • Use the protective screen mounted on the sensor for the blocking of the out- going beam; • Use the laser deactivation function in emergency. 3.2. Class 3R sensors. The sensors make...

P. 1

ABSOLUTE LINEAR ENCODERSRF25x SeriesUser’s manual22, Logoisky tract, Minsk220090, Republic of Belarustel/fax: +375 17 281 35 13info@riftek.comwww.riftek.comCertified according ISO 9001:2008Certifiedaccording toto ISO 9001:2008

P. 2

Absolute linear encoders, RF25XContents1.2.3.4.5.6.7.8.9.2Safety precautions ................................................................................................................4Electromagnetic compatibility ...............................................................................................4General...

P. 3

Absolute linear encoders, RF25X315.6.Saving current parameters in FLASH-memory (RF25x_FlushToFlash) ..................2015.7.Restoration of default parameters in FLASH-memory .............................................2015.8.Latching of the currend...

P. 4

Abso i;l£3 lincíir ¡íncoílcrs. HI 25X 1. Safety precautions • Use supply voltage and interfaces indicated in the sensor specifications. • In connection/disconnection of cables, the sensor power must be switched...

P. 5

Absolute linear encoders, RF25X5.Example of item designation when orderingRF25Х.Р-L-D-UART-AN-IN-LOUT-МSymbol5ХРLDUARTANINLOUTМDescriptionModel (1 or 6)Increased accuracyMeasurement range, mmResolution, umType of the...

P. 1

1. GENERAL INFORMATION The laser scanners are intended for non-contact measuring and checking of surface profile, position, displacement, dimensions, sorting and sensing of technological objects. The series includes 9 scanners, including 4 models in...

P. 2

LASER SCANNERS, RF620HS(DHS) Series Rev. A (14.04.2009) RIFTEK CMOS-array 5. The image of object outline thus formed is analyzed by a signal processor 6, which calculates the distance to the object (Z-coordinate) for each point of the set along the laser...

P. 3

size over the whole range both for X- and Z-coordinates, thus making it possible to adjust scanner for a maximum operation speed (see Fig. 2). Sampling frequency calculations - see here: www.riftek.com/resource/files/rf620hs_freq.zip Coordinate system...

P. 4

LASER SCANNERS, RF620HS(DHS) Series Rev. A (14.04.2009) RIFTEK The SDK makes it possible to develop your own software products without paying attention to the details of the protocol of data exchange with the scanner. 6.1.1. Description of library functions...

P. 5

LASER SCANNERS, RF620HS(DHS) Series Rev. A (14.04.2009) RIFTEK bytes [1 - 0] contain cyclic counter of measurement number; bytes [3 - 2] contain cyclic counter of packet number; bytes [5 - 4] contain the coordinate of the Z 0 point of the profile; bytes...