catalogue search
P. 01
|
You may also be interested in
Belt conveyor, Cutting machine, Conveyor belt cleat, Conveyor, Guide
Text version of the page
| | |||||||||||||||||
| Technical data sheet Validation date: 02/12/2008 | |||||||||||||||||
| | |||||||||||||||||
| | 2-ply white Polyurethane conveyor belt, Thickness 2.3 mm, Bottom cover PU [HR] (rice grain), rigid weft Complies with : FDA - EU regulations for foodstuff conveying_ | | |||||||||||||||
| | Standard range 2PURB40/LHR | | |||||||||||||||
| | |||||||||||||||||
| | |||||||||||||||||
| | Construction | | ENDLESS JOINTING | | |||||||||||||
| | |||||||||||||||||
| 2 2-ply polyester fabric PUR TPU polyurethan B Colour : white 40 Top cover thickness : 0,40 mm L 125N/mm fabric, rigid in weft HR "Rice grain" positive pattern, easy to clean | Top heating plate : 160°C ±10 °C Bottom heating plate : 160°C ±10 °C Time : 2 mn ±1 mn Pressure : 1.0 bar ±0,5 bar Additional material (powder or film) : No These recommendations may vary according to the equipment used and press heating system. Splicing methods to be used : | ||||||||||||||||
| | Main technical data | | |||||||||||||||
| | |||||||||||||||||
| Top cover : Hardness (Sh A) 85 Sh.A finishing Smooth, mat Total thickness : 2.3 mm ±0.1mm per plies Weight per m2 : 2600 g ±10% Coefficient of friction on steel slider bed : 0.5 ±20 % Maximum manufacturing width : 900 mm Temperatures : | DS finger joint | ||||||||||||||||
| Fasteners : None belt equipment : Except for some cases, this belt can be fitted out with : guiding profiles, cleats, sidewalls | |||||||||||||||||
| * Product temperature : | -40°C to +90°C -25°C to +60°C | ||||||||||||||||
| * Ambient temperature : Type of support : Slider bed, rollers, PEHD... | |||||||||||||||||
| | |||||||||||||||||
| | Mechanical data | | |||||||||||||||
| | |||||||||||||||||
| Tolerance : +20 % -10 % Breaking load : 200 N/mm Load for 1% extension : 14 N/mm Maximum working tension : 20 N/mm Pulley diameters : Recommended as a minimum with a 20°C ambient temperature | These data are subject to modification. Please make sure of their validity. REVEYRON S.A. should not be held responsible when the data sheet used is not valid anymore. | ||||||||||||||||
| | |||||||||||||||||
| flexion : 0 50 mm minimum | |||||||||||||||||
| | |||||||||||||||||
| back flexing : 0 70 mm minimum | |||||||||||||||||
| | |||||||||||||||||
| These values are not linked to the requested 0 to pull the belt to rotation. Ambient temperature : 0°C to 8°C : add +50% 0°C to -40°C : add +100% | |||||||||||||||||
| | |||||||||||||||||
| | Reveyron S.A. 247, route du Mas Rilier, Les Echets - 01700 MIRIBEL - France Tel.: +33 (0) 78 91 81 01 Fax: +33 (0)4 78 91 05 09 www.reveyron.com E.mail: info@reveyron.fr | | |||||||||||||||
| | |||||||||||||||||