Text version of the page

CONDENSATE POLISHERS

STANDARD FEATURES: • All Stainless Steel Wetted Parts • Single Unit Flows up to 710 gpm • ASME Code Stainless Steel Vessel Designed for 100 psig • Factory Assembled Stainless Steel Flanged and Welded Valve Nest • Stainless Steel Hub and Lateral Underdrain • NEMA 4XFG Electrical Enclosure • Outlet Water Sample Valve • Automatic Backwash Flow Controller • Separate Cold Water Connection for Regeneration Cycles • High capacity, High Crosslinked Macroporous Cation Resin • Raw Water Bypass Piping ADVANTAGES: • Quick ROI by Reclaiming Waste Heat and Increasing Cycles • Cold Water Regeneration Saves Heated Water • Materials Selected to Withstand Corrosive Environment • Standard Designs Reduce Cost and Delivery Time Model CP48 Why Treat Condensate 375 gpm unit • Flanged and Welded Piping Designed for Problem-Free Operation
The power industry operates in an environment of increasingly stringent boiler feed water requirements. Couple this with exploding energy costs and one finds boiler blow down to be the least desirable way of maintaining proper boiler water quality. As a cost effective alternative to boiler blow down one needs to look no further than simple sodium cycle condensate polishing. It’s the smart choice when looking for a means to control corrosion transport and the ill effects of condenser in-leakage. Particularly pronounced are the operating savings realized relative to chemical and energy consumption. Relying on proven ion exchange technology condensate polishers are also simple to operate and maintain. Let Res-Kem work up the actual savings available by polishing your dirty condensate. The payback is both swift and dramatic. • Simple Operation Reduces Operator Training Requirements • High Strength Resin Selected for Long Life OPTIONS: • Allen Bradley PLC • Differential Pressure Switch • Flow Sensor • Water Sample Cooler • Manual Isolation Valves • Subsurface Wash • Skid Assembly Res-Kem Sodium Cycle Condensate Polishers are available in a wide range of self-contained packages configured in single, double, and triple unit arrangements to treat condensate return for reuse as boiler feedwater. The standard wetted parts for Res-Kem Condensate Polishers are stainless steel. Single units are rated for flows up to 710 gpm. For larger flow rates, contact Res-Kem to determine whether larger or multiple units would be appropriate. Economical and efficient, Res-Kem Condensate Polishers can be equipped for manual, semi-automatic or full-automatic operation. Regardless of configuration, only limited technical expertise is required for operation. Res-Kem Condensate Polishers will integrate into a complete water treatment system without expensive custom field engineering and programming.