Text version of the page

RMI interface for the RMP60 probe

The RMI is a combined transmitter and receiver for use withthe RMP60 radio probe. It is designed to be easily mounted within, or close to themachine resulting in a quick and simple installation. The RMP60 RMI system is ideal for retrofitting to existing machines.Avisual indication of system status is provided by LED's.Status is continuously updated and indication is provided for start, low battery, probe status, error and signal strength.
Optical transmission systems

2.5

RMIinterface All dimensions are in mm (in). Blanking plug withsealing ring.The plug and seal fiteither side or rear exitcable positions.4 holesM5 x 13 deepon 80 p.c.d.45° When using rear exitcable, provide a Ø25(1.0) hole in mountingfor clearance.Groove for rearexit O ring seal 97 (3.82)46 (1.81)46 (1.81) 44 (1.73) 17.5 (0.69)2.0 (0.08) 45 (1.77)50 (1.97)74 (2.91) RMI PRINCIPALAPPLICATIONWorkpiece measurement and job set-up on medium to large horizontal, vertical and gantry machining centres, 5 axis machines, twin spindle machines and vertical turret lathes TRANSMISSION TYPEFrequency hopping spread spectrum radio (FHSS) CABLEØ7.5 mm (0.29 in), 13 core screened cable, each core 18 x 0.1 mmMOUNTINGAn optional mounting bracket is available allowing directional setting. RMIcable can be reconfigured for rear exit. SEALINGIPX8 COMPATIBLE INTERFACE
¥ The RMI does not require an additional interface SUITABLE PROBES
† The RMP60 radio transmission probe
¥See INTERFACESsection for more details.†See relevant application sections for more details.