Text version of the page

Taper shanks for machine tool probes Shanks for RMP60

(when not used in shank switch configuration)

– MP10 – MP10E – MP12 – MP18

(non-shank switch version)

– MP700 – MP700E probes

?Please quote the part number when ordering equipment?Shanks are supplied in a natural finish ?Dimensions mm (in) ?If you cannot find the shank you require, please contactyour local Renishaw office for further details
Shanks and adaptors

8.1 Taper shanks

Shank typePart no.TaperGauge length ADIN 69871 A M-2045-00643035.25 (1.388)M-2045-00654035.25 (1.388)
Gauge length A M-2045-00675035.25 (1.388) BT - 1982 M-2045-00773027.5 (1.083)M-2045-00274032.0 (1.260) M-2045-00735038.0 (1.496) ANSI CAT B5.50-1985 M-2045-01374035.25 (1.388) (Imperial pull stud thread)M-2045-01395035.25 (1.388) ANSI CAT B5.50-1985 M-2045-02084040.00 (1.575)
Pull stud (not supplied by Renishaw) (Metric pull stud thread)M-2045-02385035.25 (1.388) DIN 2080 M-2045-01323020.0 (0.787)
Gauge line (Manual tool change)M-2045-00244013.6 (0.535)

HSK shanks

Shank typePart no.HSKGauge length ADIN 69893 HSK Form A M-2045-0232A3246 (1.811)M-2045-0186A4047 (1.850) M-2045-0187A5050 (1.969) M-2045-0188A6353 (2.087) M-2045-0189A8050 (1.969)
Gauge length A M-2045-0190A10061 (2.402) DIN 69893 HSK Form E M-2045-0204E4038 (1.496) DIN 69893 HSK Form F M-2045-0287F353 (2.087) SANDVIK CAPTO M-2045-0346C532 (1.259)M-2045-0310C642 (1.654) M-2045-0311C850 (1.969) KENNAMETALKM M-2045-0335KM6325.6 (1.07) M-2045-0344KM63Y30.0 (1.181)
Gauge line