Text version of the page

INTERFACES AND CONTROLLERS PI 4-2 probe interface

Application - TP1, MIP, TP2, TP6, TP6A, TP20, SP25M (when using TP20) The PI 4-2 is the basic interface for standardtouch trigger probes that allows for a PICS or SSR output, the supply voltage being automatically detected. The unit is usually free standing but can be rack mounted.

PI 7-2 probe interface

Application - TP7M + TP2, TP6, TP6A, TP20
Interfaces and controllers The PI 7-2 is a dual purpose interfacedesigned to process signals from the TP7M strain gauge probe and standard touch trigger probes.Special autoselecting electronics within theinterface allow exchange of these probes without any changes to the interface.

9-1 PI 200 probe interface

Application - TP200 + TP2, TP6, TP6A, TP20, SP25M (when using TP20) The PI 200 is a dual purpose interface designedto process signals from the TP200 strain gauge probe and standard touch trigger probes.Special autoselecting electronics within theinterface allow exchange of these probes without any changes to the interface.

Specification summaryPI 4-2 / PI 7-2 / PI 200

POWER SUPPLY85-264 V 47-66 HzCURRENT CONSUMPTIONless than 200 mA(AT 240 V)ENVIRONMENTSTORAGE-10 to 70 °C (14 to 158 °F)OPERATION10 to 50 °C (50 to 122 °F)DIMENSIONSHEIGHT88 mm (3.46 in)2’U’WIDTH146 mm (5.75 in)1/3 of a 19 in rack DEPTH183 mm (7.19 in)WEIGHT1.6 kg (55.9 oz)COMPATIBILITYOUTPUTProduct interconnection system (PICS) or SSRCABLESRefer to Renishaw subsidiary, distributor or CMM manufacturer