SEPARATION OF IRON METALS BY PERMANENT MAGNETIC OVERBELT
2Pages

SEPARATION OF IRON METALS BY THE PERMANENT MAGNETIC OVERBELT (R-OMP) INTRODUCTION Both iron and non-iron metals make up one of the groups of materials to have a greater presence in waste reduction, since they involve a great worth. Iron metals are the highest percentage elements and are the most easily captured by magnetic fields. Aware of the serious environmental problem, REGULATOR-CETRISA has developed a complete line of separation equipment: the Permanent Magnetic Overbelt (R-OMP) and the Electromagnetic Overbelt (R-SKM), in order to be able to separate, recycle and recover iron metals. PHYSICAL PRINCIPLE The physical principle for the operation of the Permanent Magnetic Overbelt (R-OMP) is based on a magnetic field generated by joining highly powerful magnets. This way, iron material that crosses the magnetic field will be attracted towards the magnetic block and therefore separated from the rest of the materials. The magnetic group does not involve any energy consumption. The magnetic block forms the central part of a small conveyor belt. This belt has plugs or locks to allow the continuous evacuation of any captured iron material. The tightening and centering of the belt are done on the free drum. The Overband is located on the conveyor where the processed material circulates. It can be placed here in either transversal or longitudinal direction. In the transversal direction, the Overband can be located at any point along the conveyor. Transversal Overbelt Longitudinal Overbelt When the location is longitudinal, the installation should be done on the head roller of the conveyor to take advantage of the material’s parabolic path. REGULATOR-CETRISA offers a wide range of equipment whose magnetic disposition and type of magnets used are designed and optimized (3D design) to provide maximum magnetic power.

The Permanent Magnetic Overbelt (R-OMP) is organized by families, according to measurements and magnetic magnitudes. The basic measurements of each family are shown in the following table: Standard measurements. Other dimensions are also available. Contact with REGULATOR-CETRISA for additional information. Basic outline and measurements of the R-OMP equipments REGULATOR-CETRISA uses all of its experience to determine the ideal equipment for every application. Besides its own experience from innumerable applications, the technical department evaluates all the necessary parameters, such as:...