Text version of the page

Recoil Tang Break Tools

Recoil Tang Break Off Tools

Tang break off tools are available in hand,semi auto-matic spring type and pneumatic.The spring loaded and pneumatic tang break tools are recommended for removal of tangs in production applications.For large diameter fine thread inserts,e.g.M18-1.5 and above,3/4- 16 and above,the use of long nose pliers is an alternative method to break the tang.

Pneumatic Tang Break Tool

The pneumatic tang break tool is designed for highvolume applications where rapid,effortless tang removal is required on insert sizes up to 3/4" or M20.This tool works on the same basis as the spring loaded tool, except the pin punches downward when an air cylinder is actuated by the valve.

Manual Tang Break Tool

The simple Recoil manual tang removal tool is suit-able for low volume tang removal and is used for insert sizes up to 1/2" or M12.On larger sizes the multipurpose Recoil installation and tang break tool should be used. For tang removal,the tool is simply lifted and turned 90°, which will put the slot at right angles to the tang,then pushed downward with a sharp blow.

PHOTO to COME

Spring Loaded Tang Break Tool

Spring loaded tang break tools offer effectiveremoval of insert tangs and are suited from medium to large insert usage.Being spring loaded this tool requires no external power source and is suitable for tangremoval on insert sizes up to 1/2" or M12.This tool is a spring loaded punch and when the tool is pushed down, the pin punches downward breaking off the tang.

Reference Table for Tang Breaking Tool Extracting Tool

INSERT PARTMANUALTANG BREAKCOMBINED INSTALLATIONSPRING (ATBO)PNEUMATICTANG BREAKTYPETYPE 2-56, M2, M2.2 59060500615906159062 3-48, 3-56, M2.5 59070500695907159072 4-40, 4-48 59080500775908159082 5-40, M3 59090500895909159092 6-32, 6-40, M3.5 59100500955910159102 8-32, 8-36, M4 59130501255912159132 10-24, 12-24 59140501405914159142 10-32, M5 59160501565914159142 1/4-20, 1/4-28,M6 59190501885918159192 5/16-18 59220502195924159252 5/16-24, M8 59250502505929159252 3/8-16, M10-1.5 59280502815929159252 3/8-24, M10-1.25 59310503135929159252 7/16-14, 7/16-20, M11-1.25 5934050344 1/2-12, 1/2-13, M12-1.75 593805037559332 M14-1.5 5043859462 M16-1.5, 2 50500 M18-1.5, 2, 2.5 50591

Should inserts need to be removed,the use of theRecoil extraction tool is recommended.Extraction tools are simple and easy to use.As correct positioning will make the extraction easier,the tool should be turned 90° from the start of the coil allowing easy winding out of the insert.If the extraction tool is not gripping the insert,the edges can be resharpened.Size of extraction tool and related size inserts

SizeInchMetricPart No. No.24-40 - 3/8M3 - M1050002 No.36-32 - 1M4 - M2450003 No.41 1/8 - 1/2M27 - M3950004No.51 1/2 - 2 1/2M8 - M6550005
Should theextracting tool not grip the insert,file a small notch in the insert for the tool to bite into.

90Ëš

27