Recoil Technical catalogue - 14 / 44 Pages

MS Insert Dimensional Data
Drawing Call-Out
An example of a typical drawing specification for a Recoil insert is shown below:
No. of coil = 11
End of coil may be square or angular 1.Recoil insert part number 14063. 2.Size and Location of notch,shape of tang, reduced first
coil & all dimensions not shown will be produced to
Recoil standards. 3.Number of free coils to be counted from the notch.
NAME
MATERIAL STAINLESS STEEL AS 7245
DESCRIPTION INSERT 3/8n-24Xl'/2D .562" LONG ST.STL
NAME
PART No.
MANUFACTURER AFS
A typical drawing call-out for a Recoil screw-locking insert 3/8" - 24 x 11/2 dia.long Class 3B Unified Fine Thread (UNF)
is shown.
Drawing call-outs can be simply defined by using a production sequence process sheet to provide the operational steps with the drawing showing dimensional limits and data.(Example shown below)
1) Drill hole 25/64" (.3906") diameter,depth .812" plus your normal standard for drilling depth.
2) Countersink 120° +/-5° .42"/.45" diameter.
3) Tap with Recoil STI Tap No.44065 (class 3B) full thread depth .600".
4) Gauge with Recoil Gauge No.64063 or according to your inspection requirements.
5) Install Recoil screw-lock insert 14063 with Recoil Inserting Tool No. 54061.
6) Break off driving tang with Recoil Tang Break-off Tool No. 59280.
Recoil Thread Insert Part Numbering System
Recoil insert product part numbering system uses a logically structured 5 digit basic part number. Suffixes are typically added to differentiate between special or non-standard features.
This guide defines the structure of Recoil part numbers and may be used for reference to identify a Recoil insert from its part number.
Recoil Insert Part Number Example
05082Y AG
A A A
Special Suffixes
First Digit = Product Group
0 = Inserts Bulk - Free Running
1 = Inserts Bulk - Self Locking
2 = Insert Packets (Free running only)
Fifth Digit = Length Length in 1/2 Diameters
2 = 1D
3 = 1.5D
4 = 2D
5 = 2.5D
j5=3D..........................
AG = Silver plated C = Cadmium plated D = Dry film lubrication LH = Left Hand P = Phosphor Bronze SF = Strip Feed T = Nitronic 60 X = Inconel X750
Second Digit = Thread Type
0 = BSF, BA
1 = BSP
2 = BSW
3 = UNC
4 = UNF, UNEF, UNS, ETC.
5 = METRIC Coarse
6 = NPT, BSC, 8UN
7 = Metric Medium
8 = Metric Fine & Spark-Plug
9 = Tang break tool
M8 - 1.25 x1D 316SS, silver plated insert
Y Y = 316 Stainless Steel Third and Fourth Digit = Thread Diameter
0
=
size
in
1/16"s
(ie 08
=
1/2" )
1
=
size
in
1/16"s
(ie 08
=
1/2" )
2
=
size
in
1/16"s
(ie 08
=
1/2" )
3
=
size
in
1/16"s
(ie 08
=
1/2" )
4
=
size
in
1/16"s
(ie 08
=
1/2" )
5
=
size
in
1mm's
(ie 08
=
8mm )
6
=
size
in
1/16"s
(ie 08
=
1/2" )
7
=
size
in
1mm's
(ie 08
=
8mm )
8
=
size
in
1mm's
(ie 08
=
8mm )
Example - O5082-YAG =
12
Recoil Technical catalogue
  1. P. 1

  2. P. 9

    Locking Inserts How Locking Inserts Work Locking Insert Design The Recoil screw-locking insert is designed to providea screw-locking feature which will...
  3. P. 10

    Locking Insert Torque Values Locking torque values for unified inserts conform to NASM8846.These locking torque values are shown below. Unified Coarse...
  4. P. 11

    Finishes & Coatings Lubricants and Coatings It is important that correct selection of the most suitable fastening lubricant or coating is...
  5. P. 12

    Finishes & Coatings Silver Plating Dry Film Lubricants Primarily used to reduce the effects of galling(seizure) of screw threads in high temperature...
  6. P. 13

    Finishes & Coatings Corrosion Protection Under some service conditions, Recoil inserts and their mating parts may be subjected to a degree...
  7. P. 14

  8. P. 15

    Inch Series Insert Dimensional Data Recoil Inch Insert Part Number Call-Out and Dimensional Data THREAD SIZE PART #- STANDARD INSERT...
  9. P. 16

    Metric Series Insert Dimensional Data Recoil Metric Insert Part Number Call-Out and Dimensional Data THREAD SIZE PART # - STANDARD INSERT...
  10. P. 17

    STI Taps A Recoil Insert laps Recoil taps differ from standard taps dimensionally and only Recoil Screw Thread Insert (STI) Taps are suitable...
  11. P. 18

    STI Taps Pilot Nose Surface Coatings Pilot nose taps have been developed for repairingdamaged threads without the need for drilling prior totapping.This...
  12. P. 19

    Recoil Tap Part Numbers and Dimensional Data Unified Thread Series THREAD TAPER INTERMEDIATE BOTTOMING SPIRAL SPIRAL OVERALL...
  13. P. 20

  14. P. 30

  15. P. 40

Text version

All RECOIL catalogues and technical brochures

Archived catalogues